INA KH30-PP Linear Ball Bearing- Both Sides Sealed 30mm I.D, 40mm O.D
Tehnička dokumentacija
Tehnički podaci
Brand
INAInside Diameter
30mm
Outside Diameter
40mm
Race Width
50mm
Ball Bearing Type
Linear Ball Bearing
Sealing Arrangement
Both Sides Sealed
Bearing Clearance
CN
Material
Steel
Ball Material
Steel
Cage Material
Polyamide
Number of Rows
1
Static Load Rating
3.1kN
Dynamic Load Rating
3.3kN
Bore Type
Parallel
Partial Bearing Code
KH30PP
Race Type
Plain
Zemlja podrijetla
Germany
Detalji o proizvodu
Linear Ball Bearings
INA from Schaeffler linear ball bearings KH and linear ball bearing and housing units of the compact range have a small radial design envelope and are economical. Their low radial section height automatically makes them attractive for applications in which only a small amount of radial space is available.
The bearings have an outer ring with openings and contain a ball and cage assembly with a plastic cage. The outer ring is formed and hardened. The balls undergo return travel along the openings in the outer ring.
The bearings are available in an open version and with lip seals on both sides (suffix PP). The end face seals have two seal lips; the outer lip prevents the ingress of contamination, the inner lip retains the lubricant in the bearing.
INA
Informacije o stanju skladišta trenutno nisu dostupne.
Provjerite ponovno kasnije.
€ 44,76
€ 44,76 Each (bez PDV-a)
€ 52,37
€ 52,37 Each (s PDV-om)
1
€ 44,76
€ 44,76 Each (bez PDV-a)
€ 52,37
€ 52,37 Each (s PDV-om)
1
Kupujte na veliko
| količina | Jedinična cijena |
|---|---|
| 1 - 4 | € 44,76 |
| 5+ | € 43,59 |
Tehnička dokumentacija
Tehnički podaci
Brand
INAInside Diameter
30mm
Outside Diameter
40mm
Race Width
50mm
Ball Bearing Type
Linear Ball Bearing
Sealing Arrangement
Both Sides Sealed
Bearing Clearance
CN
Material
Steel
Ball Material
Steel
Cage Material
Polyamide
Number of Rows
1
Static Load Rating
3.1kN
Dynamic Load Rating
3.3kN
Bore Type
Parallel
Partial Bearing Code
KH30PP
Race Type
Plain
Zemlja podrijetla
Germany
Detalji o proizvodu
Linear Ball Bearings
INA from Schaeffler linear ball bearings KH and linear ball bearing and housing units of the compact range have a small radial design envelope and are economical. Their low radial section height automatically makes them attractive for applications in which only a small amount of radial space is available.
The bearings have an outer ring with openings and contain a ball and cage assembly with a plastic cage. The outer ring is formed and hardened. The balls undergo return travel along the openings in the outer ring.
The bearings are available in an open version and with lip seals on both sides (suffix PP). The end face seals have two seal lips; the outer lip prevents the ingress of contamination, the inner lip retains the lubricant in the bearing.