Yoke Cam Follower LR2032RSR, 17mm ID, 47mm OD
Tehnička dokumentacija
Tehnički podaci
Brand
INARoller Diameter
47mm
Roller Length
12mm
Type
Yoke
Bore Size
17mm
Static Load Rating
4450N
Dynamic Load Rating
4450N
Material
Steel
Zemlja podrijetla
Slovakia
Detalji o proizvodu
Single and Double Row Yoke Type Track Rollers
INA from Schaeffler ball bearing track rollers are self-retaining, single or double row ball bearings with particularly thick-walled outer rings. In addition to high radial forces, these bearings can also support axial forces in both directions.
The outer rings have a crowned or cylindrical outside surface. Designs with a crowned outside surface are used where they are inclined in relation to the mating track and edge stresses must be avoided.
Yoke type track rollers have outer rings with a crowned or cylindrical outside surface, inner rings and ball and cage assemblies with plastic cages. They are similar in construction to deep groove or angular contact ball bearings and are mounted on shafts or studs.
INA
Informacije o stanju skladišta trenutno nisu dostupne.
Provjerite ponovno kasnije.
€ 47,00
Each (bez PDV-a)
€ 54,99
Each (s PDV-om)
1
€ 47,00
Each (bez PDV-a)
€ 54,99
Each (s PDV-om)
1
Kupujte na veliko
| količina | Jedinična cijena |
|---|---|
| 1 - 4 | € 47,00 |
| 5+ | € 46,00 |
Tehnička dokumentacija
Tehnički podaci
Brand
INARoller Diameter
47mm
Roller Length
12mm
Type
Yoke
Bore Size
17mm
Static Load Rating
4450N
Dynamic Load Rating
4450N
Material
Steel
Zemlja podrijetla
Slovakia
Detalji o proizvodu
Single and Double Row Yoke Type Track Rollers
INA from Schaeffler ball bearing track rollers are self-retaining, single or double row ball bearings with particularly thick-walled outer rings. In addition to high radial forces, these bearings can also support axial forces in both directions.
The outer rings have a crowned or cylindrical outside surface. Designs with a crowned outside surface are used where they are inclined in relation to the mating track and edge stresses must be avoided.
Yoke type track rollers have outer rings with a crowned or cylindrical outside surface, inner rings and ball and cage assemblies with plastic cages. They are similar in construction to deep groove or angular contact ball bearings and are mounted on shafts or studs.