Tehnička dokumentacija
Tehnički podaci
Brand
LegrisConnector A
Push In 10 mm
Connector B
Push In 10 mm
Pneumatic Fitting Type
Tee Threaded Adaptor
Connection Style
Threaded-to-Tube
Threaded Connection
R 1/4 Male
Manufacturer Series
LF3000
Thread Material
Nickel Plated Brass
Maximum Operating Temperature
+80°C
Maximum Operating Pressure
20 bar
Body Material
Glass Reinforced Nylon
Minimum Operating Temperature
-20°C
Zemlja podrijetla
France
Detalji o proizvodu
Stud Branch Tee Adaptor - Male Taper & Parallel Thread
A high-quality polymer push in fitting suitable for compressed air applications. The LF3000 fittings can be used in systems with a working pressure from a vacuum of 0.9 bar to a positive pressure of 20 bar. These fittings are suitable for use with all plastic pneumatic plastic tubing and are 100% leak tested during manufacture.
For the connection of 2 tubes at a 90° angle to a threaded port.
Threaded Tube Adaptors, Elbows and Tees
Informacije o stanju skladišta trenutno nisu dostupne.
Provjerite ponovno kasnije.
€ 16,75
Each (In a Pack of 2) (bez PDV-a)
€ 19,598
Each (In a Pack of 2) (s PDV-om)
2
€ 16,75
Each (In a Pack of 2) (bez PDV-a)
€ 19,598
Each (In a Pack of 2) (s PDV-om)
2
Kupujte na veliko
količina | Jedinična cijena | Po pakovanje |
---|---|---|
2 - 8 | € 16,75 | € 33,50 |
10+ | € 16,50 | € 33,00 |
Tehnička dokumentacija
Tehnički podaci
Brand
LegrisConnector A
Push In 10 mm
Connector B
Push In 10 mm
Pneumatic Fitting Type
Tee Threaded Adaptor
Connection Style
Threaded-to-Tube
Threaded Connection
R 1/4 Male
Manufacturer Series
LF3000
Thread Material
Nickel Plated Brass
Maximum Operating Temperature
+80°C
Maximum Operating Pressure
20 bar
Body Material
Glass Reinforced Nylon
Minimum Operating Temperature
-20°C
Zemlja podrijetla
France
Detalji o proizvodu
Stud Branch Tee Adaptor - Male Taper & Parallel Thread
A high-quality polymer push in fitting suitable for compressed air applications. The LF3000 fittings can be used in systems with a working pressure from a vacuum of 0.9 bar to a positive pressure of 20 bar. These fittings are suitable for use with all plastic pneumatic plastic tubing and are 100% leak tested during manufacture.
For the connection of 2 tubes at a 90° angle to a threaded port.