Tehnička dokumentacija
Tehnički podaci
Brand
MicrochipNumber of Supervisors
1
Power Fail Detection
Yes
Output Driver
Open Drain
Mounting Type
Surface Mount
Maximum Reset Active Time
10µs
Package Type
SOT-23
Pin Count
3
Dimensions
3.04 x 1.4 x 1.02mm
Maximum Monitored Voltage
3.15V
Maximum Operating Supply Voltage
5.5 V
Minimum Operating Temperature
-40 °C
Maximum Operating Temperature
+85 °C
Minimum Operating Supply Voltage
1 V
Minimum Monitored Voltage
3.07V
Detalji o proizvodu
MCP130 Microcontroller Supervisory and Reset Circuit
The Microchip MCP130 is a Voltage Supervisor that holds a Microcontroller or other device in Reset during under-voltage conditions. During Start-Up and Brownout events the MCP130 asserts a Reset signal via an active-low Reset Pin. Integrated into the MCP130 is an internal 5 kΩ Pull-Up Resistor.
Supervisory & Reset Circuits - Microchip
Informacije o stanju skladišta trenutno nisu dostupne.
Provjerite ponovno kasnije.
€ 0,85
komadno (isporučuje se u namotaju) (bez PDV-a)
€ 0,994
komadno (isporučuje se u namotaju) (s PDV-om)
10
€ 0,85
komadno (isporučuje se u namotaju) (bez PDV-a)
€ 0,994
komadno (isporučuje se u namotaju) (s PDV-om)
10
Kupujte na veliko
količina | Jedinična cijena | Po kolut |
---|---|---|
10 - 10 | € 0,85 | € 8,50 |
20+ | € 0,84 | € 8,40 |
Tehnička dokumentacija
Tehnički podaci
Brand
MicrochipNumber of Supervisors
1
Power Fail Detection
Yes
Output Driver
Open Drain
Mounting Type
Surface Mount
Maximum Reset Active Time
10µs
Package Type
SOT-23
Pin Count
3
Dimensions
3.04 x 1.4 x 1.02mm
Maximum Monitored Voltage
3.15V
Maximum Operating Supply Voltage
5.5 V
Minimum Operating Temperature
-40 °C
Maximum Operating Temperature
+85 °C
Minimum Operating Supply Voltage
1 V
Minimum Monitored Voltage
3.07V
Detalji o proizvodu
MCP130 Microcontroller Supervisory and Reset Circuit
The Microchip MCP130 is a Voltage Supervisor that holds a Microcontroller or other device in Reset during under-voltage conditions. During Start-Up and Brownout events the MCP130 asserts a Reset signal via an active-low Reset Pin. Integrated into the MCP130 is an internal 5 kΩ Pull-Up Resistor.