Tehnička dokumentacija
Tehnički podaci
Brand
MicrochipNumber of Supervisors
1
Output Driver
Active Low, Open Drain
Mounting Type
Surface Mount
Maximum Reset Active Time
700ms
Package Type
SOT-23
Pin Count
3
Dimensions
2.9 x 1.3 x 0.95mm
Maximum Monitored Voltage
4.75V
Maximum Operating Supply Voltage
5.5 V
Minimum Monitored Voltage
4.62V
Minimum Operating Temperature
-40 °C
Maximum Operating Temperature
+85 °C
Minimum Operating Supply Voltage
1 V
Detalji o proizvodu
MCP130 Microcontroller Supervisory and Reset Circuit
The Microchip MCP130 is a Voltage Supervisor that holds a Microcontroller or other device in Reset during under-voltage conditions. During Start-Up and Brownout events the MCP130 asserts a Reset signal via an active-low Reset Pin. Integrated into the MCP130 is an internal 5 kΩ Pull-Up Resistor.
Supervisory & Reset Circuits - Microchip
Informacije o stanju skladišta trenutno nisu dostupne.
Provjerite ponovno kasnije.
€ 0,85
komadno (isporučuje se u namotaju) (bez PDV-a)
€ 0,994
komadno (isporučuje se u namotaju) (s PDV-om)
5
€ 0,85
komadno (isporučuje se u namotaju) (bez PDV-a)
€ 0,994
komadno (isporučuje se u namotaju) (s PDV-om)
5
Kupujte na veliko
količina | Jedinična cijena | Po kolut |
---|---|---|
5 - 20 | € 0,85 | € 4,25 |
25+ | € 0,84 | € 4,20 |
Tehnička dokumentacija
Tehnički podaci
Brand
MicrochipNumber of Supervisors
1
Output Driver
Active Low, Open Drain
Mounting Type
Surface Mount
Maximum Reset Active Time
700ms
Package Type
SOT-23
Pin Count
3
Dimensions
2.9 x 1.3 x 0.95mm
Maximum Monitored Voltage
4.75V
Maximum Operating Supply Voltage
5.5 V
Minimum Monitored Voltage
4.62V
Minimum Operating Temperature
-40 °C
Maximum Operating Temperature
+85 °C
Minimum Operating Supply Voltage
1 V
Detalji o proizvodu
MCP130 Microcontroller Supervisory and Reset Circuit
The Microchip MCP130 is a Voltage Supervisor that holds a Microcontroller or other device in Reset during under-voltage conditions. During Start-Up and Brownout events the MCP130 asserts a Reset signal via an active-low Reset Pin. Integrated into the MCP130 is an internal 5 kΩ Pull-Up Resistor.