Take Up Bearing Unit, ST50, 50mm ID

RS kataloški broj:: 243-5644brend: NSK-RHPProizvođački broj:: ST50
brand-logo
Prikaži sve u Bearing Units

Tehnička dokumentacija

Tehnički podaci

Brand

NSK-RHP

Inside Diameter

50mm

Bearing Unit Type

Take Up Bearing Unit

Material

Cast Iron

Length

151mm

Width

118mm

Depth

49.5mm

Detalji o proizvodu

Self Lube Bearing Take-Up Unit

Take-up units are used to “take up” the slackness in conveyor belts. A nut is inserted into the slot and a bolt through the casting to adjust the belt tension.

Supplied with

grease nipples

Bearing Take-Up Units

Take-up units are often used where shaft or belt adjustment/tightening is required, and are often seen installed within conveyor systems. The units may also be installed within food processing environments and used for agricultural equipment applications.

Informacije o stanju skladišta trenutno nisu dostupne.

RSD 18.082

RSD 18.082 Each (bez PDV-a)

RSD 21.699

RSD 21.699 Each (s PDV-om)

Take Up Bearing Unit, ST50, 50mm ID

1

Dostupno u više komada 1
1RSD 18.082
2RSD 36.165
3RSD 54.247
4RSD 72.330
5RSD 88.041
6RSD 105.650
7RSD 123.258
8RSD 140.866
9RSD 158.475
10RSD 176.083
11RSD 193.691
12RSD 211.299
13RSD 228.908
14RSD 246.516
15RSD 264.124

RSD 18.082

RSD 18.082 Each (bez PDV-a)

RSD 21.699

RSD 21.699 Each (s PDV-om)

Take Up Bearing Unit, ST50, 50mm ID
Informacije o stanju skladišta trenutno nisu dostupne.

1

Dostupno u više komada 1
1RSD 18.082
2RSD 36.165
3RSD 54.247
4RSD 72.330
5RSD 88.041
6RSD 105.650
7RSD 123.258
8RSD 140.866
9RSD 158.475
10RSD 176.083
11RSD 193.691
12RSD 211.299
13RSD 228.908
14RSD 246.516
15RSD 264.124

Informacije o stanju skladišta trenutno nisu dostupne.

Proverite ponovno kasnije.

količinaJedinična cena
1 - 4RSD 18.082
5+RSD 17.608

Tehnička dokumentacija

Tehnički podaci

Brand

NSK-RHP

Inside Diameter

50mm

Bearing Unit Type

Take Up Bearing Unit

Material

Cast Iron

Length

151mm

Width

118mm

Depth

49.5mm

Detalji o proizvodu

Self Lube Bearing Take-Up Unit

Take-up units are used to “take up” the slackness in conveyor belts. A nut is inserted into the slot and a bolt through the casting to adjust the belt tension.

Supplied with

grease nipples

Bearing Take-Up Units

Take-up units are often used where shaft or belt adjustment/tightening is required, and are often seen installed within conveyor systems. The units may also be installed within food processing environments and used for agricultural equipment applications.