Phoenix Contact SUBCON-PLUS 9 Way 35 ° Cable Mount D-sub Connector Socket, with Screw
Tehnička dokumentacija
Tehnički podaci
Brand
Phoenix ContactNumber Of Contacts
9
Gender
Female
Body Orientation
35 °
Mounting Type
Cable Mount
D Connector Type
Standard D-Sub
Mounting Hardware
Screw
Termination Method
Screw Terminal
Current Rating
100mA
Housing Material
Metal Plated ABS
Voltage Rating
50.0 V
Length
58
Width
16.6
Depth
39.4
Series
SUBCON-PLUS
Dimensions
(W) 0.65 x (H) 1.5 x (L) 2.2in
Minimum Operating Temperature
-20°C
Maximum Operating Temperature
+75°C
Zemlja podrijetla
Germany
Detalji o proizvodu
Phoenix Contact SUBCON-PLUS-CAN D-Sub Connectors
SUBCON-PLUS-CAN 9 pin D-sub socket connectors designed for use in CAN systems up to 1 MBit/s (CAN, CANopen, SafetyBus-P) allowing fast connection of incoming and outgoing bus cables under field conditions. These SUBCON-PLUS-CAN d-sub connectors have a 120 Ohm integrated terminating resistor which can be activated externally by a slide switch, segment by segment startup, a shielded ABS housing, screw connections and can all be used with bus cables as per the CiA Draft Recommendation 303-1 with an outside diameter of 8mm.
Stock numbers 801-9119, and 648-3518 have two 35° angled cable entries and an internal connection unit which can be turned around enabling cable insertion from the left or the right. Stock number 648-3518 has a second d-sub connection for connecting a programming device. These all accept a cable cross section of 7.6mm to 8.4mm.
Stock number 648-3495 has a 35° angled cable entry and can accept a variable cable diameter range of 6 to 10mm.
Stock number 648-3502 has a 180° axial cable entry and two cable entries
For suitable screwdriver see stock number 390-9663
BUS connectors
Zamisliti. Stvoriti. Surađivati
PRIDRUŽITE SE BESPLATNO
Bez skrivenih naknada!
- Preuzmite i koristite naš softver DesignSpark za svoje PCB i 3D mehaničke dizajne
- Pregledajte i doprinesite sadržaju internet stranice i foruma
- Preuzmite 3D modele, sheme i otiske s više od milijun proizvoda
Informacije o stanju skladišta trenutno nisu dostupne.
Provjerite ponovno kasnije.
€ 84,21
Each (bez PDV-a)
€ 98,53
Each (s PDV-om)
1
€ 84,21
Each (bez PDV-a)
€ 98,53
Each (s PDV-om)
1
Kupujte na veliko
| količina | Jedinična cijena |
|---|---|
| 1 - 9 | € 84,21 |
| 10 - 24 | € 72,60 |
| 25 - 49 | € 66,77 |
| 50+ | € 60,20 |
Zamisliti. Stvoriti. Surađivati
PRIDRUŽITE SE BESPLATNO
Bez skrivenih naknada!
- Preuzmite i koristite naš softver DesignSpark za svoje PCB i 3D mehaničke dizajne
- Pregledajte i doprinesite sadržaju internet stranice i foruma
- Preuzmite 3D modele, sheme i otiske s više od milijun proizvoda
Tehnička dokumentacija
Tehnički podaci
Brand
Phoenix ContactNumber Of Contacts
9
Gender
Female
Body Orientation
35 °
Mounting Type
Cable Mount
D Connector Type
Standard D-Sub
Mounting Hardware
Screw
Termination Method
Screw Terminal
Current Rating
100mA
Housing Material
Metal Plated ABS
Voltage Rating
50.0 V
Length
58
Width
16.6
Depth
39.4
Series
SUBCON-PLUS
Dimensions
(W) 0.65 x (H) 1.5 x (L) 2.2in
Minimum Operating Temperature
-20°C
Maximum Operating Temperature
+75°C
Zemlja podrijetla
Germany
Detalji o proizvodu
Phoenix Contact SUBCON-PLUS-CAN D-Sub Connectors
SUBCON-PLUS-CAN 9 pin D-sub socket connectors designed for use in CAN systems up to 1 MBit/s (CAN, CANopen, SafetyBus-P) allowing fast connection of incoming and outgoing bus cables under field conditions. These SUBCON-PLUS-CAN d-sub connectors have a 120 Ohm integrated terminating resistor which can be activated externally by a slide switch, segment by segment startup, a shielded ABS housing, screw connections and can all be used with bus cables as per the CiA Draft Recommendation 303-1 with an outside diameter of 8mm.
Stock numbers 801-9119, and 648-3518 have two 35° angled cable entries and an internal connection unit which can be turned around enabling cable insertion from the left or the right. Stock number 648-3518 has a second d-sub connection for connecting a programming device. These all accept a cable cross section of 7.6mm to 8.4mm.
Stock number 648-3495 has a 35° angled cable entry and can accept a variable cable diameter range of 6 to 10mm.
Stock number 648-3502 has a 180° axial cable entry and two cable entries
For suitable screwdriver see stock number 390-9663
BUS connectors
Zamisliti. Stvoriti. Surađivati
PRIDRUŽITE SE BESPLATNO
Bez skrivenih naknada!
- Preuzmite i koristite naš softver DesignSpark za svoje PCB i 3D mehaničke dizajne
- Pregledajte i doprinesite sadržaju internet stranice i foruma
- Preuzmite 3D modele, sheme i otiske s više od milijun proizvoda