SMC Pneumatic Piston Rod Cylinder - 63mm Bore, 160mm Stroke, CP96 Series, Double Acting
Tehnička dokumentacija
Tehnički podaci
Brand
SMCStroke
160mm
Bore
63mm
Action
Double
Manufacturer Series
CP96
Length
354mm
Cushioning Type
Air
Dimensions
354 x 77 x 77mm
Width
77mm
Absolute Maximum Pressure
1.5MPa
Maximum Operating Pressure
1 MPa
Height
77mm
ISO Standard
4414
Minimum Operating Temperature
-20°C
Weight
5.1kg
Maximum Operating Temperature
+70°C
Stroke Interval Weight
0.32 kg @ 50 mm Stroke
Zemlja podrijetla
France
Detalji o proizvodu
CP96-C Double Acting Cylinder
The SMC CP96-C series double-acting pneumatic cylinders feature both air and bumper cushioning. Using both air and bumper cushioning reduces the length of the cushion stroke reducing cycle time and the noise at the end of the stroke. CP96-C cylinder bodies are grooved on four sides to allow the easy fitting of CNOMO or SMC M9 and A9 position sensors. Sensors can simply be slid into position from either end of the profile actuator body.
CP96 Series
Informacije o stanju skladišta trenutno nisu dostupne.
Provjerite ponovno kasnije.
€ 229,05
Each (bez PDV-a)
€ 267,99
Each (s PDV-om)
1
€ 229,05
Each (bez PDV-a)
€ 267,99
Each (s PDV-om)
1
Tehnička dokumentacija
Tehnički podaci
Brand
SMCStroke
160mm
Bore
63mm
Action
Double
Manufacturer Series
CP96
Length
354mm
Cushioning Type
Air
Dimensions
354 x 77 x 77mm
Width
77mm
Absolute Maximum Pressure
1.5MPa
Maximum Operating Pressure
1 MPa
Height
77mm
ISO Standard
4414
Minimum Operating Temperature
-20°C
Weight
5.1kg
Maximum Operating Temperature
+70°C
Stroke Interval Weight
0.32 kg @ 50 mm Stroke
Zemlja podrijetla
France
Detalji o proizvodu
CP96-C Double Acting Cylinder
The SMC CP96-C series double-acting pneumatic cylinders feature both air and bumper cushioning. Using both air and bumper cushioning reduces the length of the cushion stroke reducing cycle time and the noise at the end of the stroke. CP96-C cylinder bodies are grooved on four sides to allow the easy fitting of CNOMO or SMC M9 and A9 position sensors. Sensors can simply be slid into position from either end of the profile actuator body.