Bergquist Self-Adhesive Thermal Interface Sheet, 0.02in Thick, 5W/m·K, Gap Pad 5000S35, 4 x 4in

RS kataloški broj:: 707-3421brend: BergquistProizvođački broj:: GP5000S35-0.020-02-0404
brand-logo
Prikaži sve u Thermal Pads

Tehnička dokumentacija

Tehnički podaci

Zemlja podrijetla

United States

Detalji o proizvodu

Window Comparators, Texas Instruments

Comparators, Texas Instruments

Texas Instruments’ range of voltage comparators includes not only conventional single, dual and quad comparator packages but also window comparators and over- & under-voltage supervisors.

Although comparators and operational amplifiers are superficially similar devices their operation in practical applications is very different. Op amps are intended for linear operation accompanied by suitable feedback whereas comparators are tailored for rapid switching and generally operated in open-loop mode. Dedicated voltage comparators have significantly shorter propagation delays and are capable of faster response times under saturated conditions. Most comparators are also more tolerant of high differential input voltages and many have open-collector outputs allowing parallel operation with other devices.

Informacije o stanju skladišta trenutno nisu dostupne.

Proverite ponovno kasnije.

Informacije o stanju skladišta trenutno nisu dostupne.

RSD 8.034

Each (bez PDV-a)

RSD 9.641

Each (s PDV-om)

Bergquist Self-Adhesive Thermal Interface Sheet, 0.02in Thick, 5W/m·K, Gap Pad 5000S35, 4 x 4in

RSD 8.034

Each (bez PDV-a)

RSD 9.641

Each (s PDV-om)

Bergquist Self-Adhesive Thermal Interface Sheet, 0.02in Thick, 5W/m·K, Gap Pad 5000S35, 4 x 4in
Informacije o stanju skladišta trenutno nisu dostupne.

Kupujte na veliko

količinaJedinična cena
1 - 9RSD 8.034
10 - 24RSD 7.773
25 - 49RSD 7.642
50 - 99RSD 7.512
100+RSD 7.316

Tehnička dokumentacija

Tehnički podaci

Zemlja podrijetla

United States

Detalji o proizvodu

Window Comparators, Texas Instruments

Comparators, Texas Instruments

Texas Instruments’ range of voltage comparators includes not only conventional single, dual and quad comparator packages but also window comparators and over- & under-voltage supervisors.

Although comparators and operational amplifiers are superficially similar devices their operation in practical applications is very different. Op amps are intended for linear operation accompanied by suitable feedback whereas comparators are tailored for rapid switching and generally operated in open-loop mode. Dedicated voltage comparators have significantly shorter propagation delays and are capable of faster response times under saturated conditions. Most comparators are also more tolerant of high differential input voltages and many have open-collector outputs allowing parallel operation with other devices.