Parker PRT series 0.1s to 3s Pneumatic Timer, 8 bar max
Tehnička dokumentacija
Tehnički podaci
Brand
ParkerMaximum Time
3s
Minimum Time
0.1s
Maximum Operating Temperature
+60°C
Manufacturer Series
PRT
Minimum Operating Pressure
3bar
Maximum Operating Pressure
8 bar
Minimum Operating Temperature
-15°C
Zemlja podrijetla
France
Detalji o proizvodu
Timer Module
A pneumatic timer consists of a solenoid coil/core, operating spring, timing disk, filter and diaphragm. The core moves up into the coil when it has been energized and this leads to pressure on the diaphragm. The diaphragm moves into the top chamber which un-traps the air through the timing disk. By altering the needle valve you can adjust the amount of delay.
Logic Systems
Logic units are best thought of as miniature valves, whose purpose is to influence the behaviour of larger power valves. They achieve this by producing and receiving output and input signals, using the common air supply. In this way, they are able to monitor and control a whole sequence of operations with great accuracy and repeatability.
Informacije o stanju skladišta trenutno nisu dostupne.
Proverite ponovno kasnije.
RSD 42.566
Each (bez PDV-a)
RSD 51.079
Each (s PDV-om)
1
RSD 42.566
Each (bez PDV-a)
RSD 51.079
Each (s PDV-om)
1
Kupujte na veliko
| količina | Jedinična cena |
|---|---|
| 1 - 4 | RSD 42.566 |
| 5+ | RSD 41.447 |
Tehnička dokumentacija
Tehnički podaci
Brand
ParkerMaximum Time
3s
Minimum Time
0.1s
Maximum Operating Temperature
+60°C
Manufacturer Series
PRT
Minimum Operating Pressure
3bar
Maximum Operating Pressure
8 bar
Minimum Operating Temperature
-15°C
Zemlja podrijetla
France
Detalji o proizvodu
Timer Module
A pneumatic timer consists of a solenoid coil/core, operating spring, timing disk, filter and diaphragm. The core moves up into the coil when it has been energized and this leads to pressure on the diaphragm. The diaphragm moves into the top chamber which un-traps the air through the timing disk. By altering the needle valve you can adjust the amount of delay.
Logic Systems
Logic units are best thought of as miniature valves, whose purpose is to influence the behaviour of larger power valves. They achieve this by producing and receiving output and input signals, using the common air supply. In this way, they are able to monitor and control a whole sequence of operations with great accuracy and repeatability.