RS PRO Black Plastic Sheet, 500mm x 300mm x 10mm
Tehnička dokumentacija
Tehnički podaci
Brand
RS ProColour
Black
Form
Full
Length
500mm
Width
300mm
Thickness
10mm
Material
PA
Laminated
No
Density
1.14g/cm³
Tensile Strength
75 MPa
Flammability Rating
UL 94 HB
Water Absorption
7%
Maximum Operating Temperature
+100°C
Adhesive Backing
No
Elongation
25%
Zemlja podrijetla
Germany
Detalji o proizvodu
RS PRO Molybdenum Disulphide filled Nylon 66 Rod
A Nylon 66 rod optimised with a Molybdenum Disulphide for a low friction and self-lubricating engineering rod capable of handing high temperatures and high mechanical strength applications.
Nylon 66 is a high-performance thermoplastic with excellent mechanical properties. It has a high level of machineability, a high tensile strength, stiffness and a high level of heat resistance.
Unaffected by chlorinated hydrocarbons, impact resistant with a high abrasion and ultraviolet resistance the Nylon 66 rods are ideal for a wide range of uses. These include higher stress applications such as the creation of bushes, friction bearings, gears, wheels, and machine parts.
Nylatron® / MoS2 Filled Nylon
These materials are abrasion resistant and self-lubricating and have reasonably good chemical resistance to weak acids.
Informacije o stanju skladišta trenutno nisu dostupne.
Provjerite ponovno kasnije.
€ 130,18
€ 130,18 Each (bez PDV-a)
€ 152,31
€ 152,31 Each (s PDV-om)
1
€ 130,18
€ 130,18 Each (bez PDV-a)
€ 152,31
€ 152,31 Each (s PDV-om)
1
Kupujte na veliko
| količina | Jedinična cijena |
|---|---|
| 1 - 2 | € 130,18 |
| 3 - 9 | € 122,80 |
| 10 - 29 | € 121,10 |
| 30+ | € 114,54 |
Tehnička dokumentacija
Tehnički podaci
Brand
RS ProColour
Black
Form
Full
Length
500mm
Width
300mm
Thickness
10mm
Material
PA
Laminated
No
Density
1.14g/cm³
Tensile Strength
75 MPa
Flammability Rating
UL 94 HB
Water Absorption
7%
Maximum Operating Temperature
+100°C
Adhesive Backing
No
Elongation
25%
Zemlja podrijetla
Germany
Detalji o proizvodu
RS PRO Molybdenum Disulphide filled Nylon 66 Rod
A Nylon 66 rod optimised with a Molybdenum Disulphide for a low friction and self-lubricating engineering rod capable of handing high temperatures and high mechanical strength applications.
Nylon 66 is a high-performance thermoplastic with excellent mechanical properties. It has a high level of machineability, a high tensile strength, stiffness and a high level of heat resistance.
Unaffected by chlorinated hydrocarbons, impact resistant with a high abrasion and ultraviolet resistance the Nylon 66 rods are ideal for a wide range of uses. These include higher stress applications such as the creation of bushes, friction bearings, gears, wheels, and machine parts.
Nylatron® / MoS2 Filled Nylon
These materials are abrasion resistant and self-lubricating and have reasonably good chemical resistance to weak acids.