RS PRO E5 Indicator Light, Clear, 6 V, 55 mA
Tehnička dokumentacija
Tehnički podaci
Brand
RS ProVoltage Rating
6 V
Lamp Base
E5
Current Rating
55 mA
Diameter
5mm
Lamp Size
T1 1/2
Lens Colour
Clear
Zemlja podrijetla
Korea, Republic Of
Detalji o proizvodu
T-1 (5mm) & T-1 (6mm) Tubular LES
Screw (LES, MES, SES)
Filament lamps will perform to specification and give optimum life when: they are powered at the rated voltage from a stabilised 50Hz ac supply; the ambient temperature is in the range +20°C to +25°C; and where no mechanical vibration is present.
Deviations from these criteria can have a significant effect on lamp life, particularly with low current filaments (<80mA).
Operation from a DC supply at rated voltage can reduce specified life by up to 50%. The effect of variation from the rated operating voltage should be noted: 5% above will reduce lamp life by up to 50%. 5% below will significantly increase lamp life. Current consumption can vary by up to ±10% on stated values at rated supply voltage. Care should therefore be exercised when running a number of lamps in series. In such applications it is recommended that the rated voltage be reduced by 10% to prevent premature failure of individual lamps.
Conversion of light output units: Lumens = MSCP x 12.6, MSCP = Lumens / 12.6.
Informacije o stanju skladišta trenutno nisu dostupne.
Provjerite ponovno kasnije.
€ 2,15
Each (In a Pack of 10) (bez PDV-a)
€ 2,516
Each (In a Pack of 10) (s PDV-om)
10
€ 2,15
Each (In a Pack of 10) (bez PDV-a)
€ 2,516
Each (In a Pack of 10) (s PDV-om)
10
Kupujte na veliko
količina | Jedinična cijena | Po pakovanje |
---|---|---|
10 - 90 | € 2,15 | € 21,50 |
100 - 490 | € 1,94 | € 19,40 |
500 - 990 | € 1,69 | € 16,90 |
1000+ | € 1,64 | € 16,40 |
Tehnička dokumentacija
Tehnički podaci
Brand
RS ProVoltage Rating
6 V
Lamp Base
E5
Current Rating
55 mA
Diameter
5mm
Lamp Size
T1 1/2
Lens Colour
Clear
Zemlja podrijetla
Korea, Republic Of
Detalji o proizvodu
T-1 (5mm) & T-1 (6mm) Tubular LES
Screw (LES, MES, SES)
Filament lamps will perform to specification and give optimum life when: they are powered at the rated voltage from a stabilised 50Hz ac supply; the ambient temperature is in the range +20°C to +25°C; and where no mechanical vibration is present.
Deviations from these criteria can have a significant effect on lamp life, particularly with low current filaments (<80mA).
Operation from a DC supply at rated voltage can reduce specified life by up to 50%. The effect of variation from the rated operating voltage should be noted: 5% above will reduce lamp life by up to 50%. 5% below will significantly increase lamp life. Current consumption can vary by up to ±10% on stated values at rated supply voltage. Care should therefore be exercised when running a number of lamps in series. In such applications it is recommended that the rated voltage be reduced by 10% to prevent premature failure of individual lamps.
Conversion of light output units: Lumens = MSCP x 12.6, MSCP = Lumens / 12.6.