Tehnička dokumentacija
Tehnički podaci
Proizvođač
3MTape Type
Hazard Tape
Boja
Black, Yellow
Backing Material
Vinyl
Width
102mm
Length
33m
Thickness
0.14mm
Pre-printed
None
Adhesion Strength
2.1 N/cm
Tensile Strength
26N/cm
Elongation At Break
170%
Maximum Operating Temperature
+77°C
Minimum Operating Temperature
+4°C
Adhesive Material
Rubber
Model Number
5702
Zemlja podrijetla
United States
Detalji o proizvodu
3M Hazard Tape
The 3M 5702 black/yellow safety stripe tape has been developed to provide you with a tape to mark out your hazards. The durable tape comes in 33 m lengths with the colour embedded into the tape to give you long-term resistance to abrasion, moisture and scuffing.
With a rubber adhesive and vinyl backing the 3M hazard tape has an excellent holding strength and helps prevent edge lifting.
The 3M safety stripe hazards tape is a black/yellow colour, durable vinyl backing used to identify and mark traffic areas and physical hazards. This tape is 0.14mm thick, 50mm wide and 33mm long. It provides clear safety indication for driving and walking lanes, hazardous areas, protruding equipment and low hanging objects. This rubber adhesive provides an excellent holding strength on many surfaces.
Caution:
Avoid ketones, esters and chlorinated hydrocarbons, which can cause the backing to swell or degrade."
Informacije o stanju skladišta trenutno nisu dostupne.
Provjerite ponovno kasnije.
€ 165,94
komadno (bez PDV-a)
€ 207,42
komadno (s PDV-om)
1
€ 165,94
komadno (bez PDV-a)
€ 207,42
komadno (s PDV-om)
1
Kupujte na veliko
količina | jedinična cijena |
---|---|
1 - 14 | € 165,94 |
15 - 39 | € 161,55 |
40+ | € 161,39 |
Tehnička dokumentacija
Tehnički podaci
Proizvođač
3MTape Type
Hazard Tape
Boja
Black, Yellow
Backing Material
Vinyl
Width
102mm
Length
33m
Thickness
0.14mm
Pre-printed
None
Adhesion Strength
2.1 N/cm
Tensile Strength
26N/cm
Elongation At Break
170%
Maximum Operating Temperature
+77°C
Minimum Operating Temperature
+4°C
Adhesive Material
Rubber
Model Number
5702
Zemlja podrijetla
United States
Detalji o proizvodu
3M Hazard Tape
The 3M 5702 black/yellow safety stripe tape has been developed to provide you with a tape to mark out your hazards. The durable tape comes in 33 m lengths with the colour embedded into the tape to give you long-term resistance to abrasion, moisture and scuffing.
With a rubber adhesive and vinyl backing the 3M hazard tape has an excellent holding strength and helps prevent edge lifting.
The 3M safety stripe hazards tape is a black/yellow colour, durable vinyl backing used to identify and mark traffic areas and physical hazards. This tape is 0.14mm thick, 50mm wide and 33mm long. It provides clear safety indication for driving and walking lanes, hazardous areas, protruding equipment and low hanging objects. This rubber adhesive provides an excellent holding strength on many surfaces.
Caution:
Avoid ketones, esters and chlorinated hydrocarbons, which can cause the backing to swell or degrade."