4D Systems, 1.7in Arduino Compatible Display with OLED Display
Tehnička dokumentacija
Tehnički podaci
Brand
4D SystemsDiagonal Display Size
1.7in
Display Technology
OLED Display
Display Resolution
160 x 128pixel
Viewing Area Dimensions
33.6 x 27.0mm
Dimensions
52.0 x 36.0 x 15.5mm
For Use With
Arduino
Zemlja podrijetla
Philippines
Detalji o proizvodu
4D Systems PMOLED Display Starter Kits with GOLDELOX Processor for Use with Arduino
The range of OLED display starter kit modules for Arduino available from 4D Systems provide everything needed by a user to easily interface between an Arduino (using its serial port + one GPIO pin) and the OLED module, eliminating wiring headaches. The user can then quickly begin programming the 4D Systems display module through the Arduino. This display is a secondary display and does not replace the monitor or TV used to program the Arduino itself.
Powered from the Arduino the display module GOLDELOX processor can be programmed and configured using 4D Systems’ Workshop4 IDE software (see datasheet for download instruction). The OLED module is set up to receive a wide range of serial commands from the Arduino, for example, to display shapes, text, images, to play sounds and log data to the microSD card.
4D Systems Passive Matrix OLED Displays
Informacije o stanju skladišta trenutno nisu dostupne.
Provjerite ponovno kasnije.
KM 374,59
Each (bez PDV-a)
KM 438,27
Each (s PDV-om)
1
KM 374,59
Each (bez PDV-a)
KM 438,27
Each (s PDV-om)
1
Tehnička dokumentacija
Tehnički podaci
Brand
4D SystemsDiagonal Display Size
1.7in
Display Technology
OLED Display
Display Resolution
160 x 128pixel
Viewing Area Dimensions
33.6 x 27.0mm
Dimensions
52.0 x 36.0 x 15.5mm
For Use With
Arduino
Zemlja podrijetla
Philippines
Detalji o proizvodu
4D Systems PMOLED Display Starter Kits with GOLDELOX Processor for Use with Arduino
The range of OLED display starter kit modules for Arduino available from 4D Systems provide everything needed by a user to easily interface between an Arduino (using its serial port + one GPIO pin) and the OLED module, eliminating wiring headaches. The user can then quickly begin programming the 4D Systems display module through the Arduino. This display is a secondary display and does not replace the monitor or TV used to program the Arduino itself.
Powered from the Arduino the display module GOLDELOX processor can be programmed and configured using 4D Systems’ Workshop4 IDE software (see datasheet for download instruction). The OLED module is set up to receive a wide range of serial commands from the Arduino, for example, to display shapes, text, images, to play sounds and log data to the microSD card.