ABB GATE-D2 Series Safety Module, 5 Inputs, 5 Outputs, 24 V, NO/2 NC
Tehnička dokumentacija
Tehnički podaci
Proizvođač
ABBProduct Type
Safety Module
Series
GATE-D2
Sub Type
Gateway
Mount Type
DIN Rail
For Use With
DeviceNet
Supply Voltage
24 V
Normal State Configuration
NO/2 NC
Number of Inputs
5
Number of Outputs
5
Terminal Type
Spring Clamp
Power Rating
3kW
Hazardous Area Certification
No
Standards/Approvals
No
Detalji o proizvodu
Pluto Gateways For Network Connection
The gateways are devices for transfer of data in both directions between the Pluto bus and other fieldbuses. They are made in these versions; GATE-D1 for DeviceNet (733-4849), GATE-E1 for Ethernet using Modbus A second usage for GATE-D1 and GATE-C1 is as a CAN-bridge (repeater) which transfers CAN telegrams between two CAN-buses. This can be useful when long cables are needed. With CANbridge the usage is not limited to any special protocol such as the Pluto CAN bus system, but it can be used for most CAN bus systems.
Informacije o stanju skladišta trenutno nisu dostupne.
€ 590,00
€ 590,00 komadno (bez PDV-a)
€ 737,50
€ 737,50 komadno (s PDV-om)
1
€ 590,00
€ 590,00 komadno (bez PDV-a)
€ 737,50
€ 737,50 komadno (s PDV-om)
Informacije o stanju skladišta trenutno nisu dostupne.
1
| količina | jedinična cijena |
|---|---|
| 1 - 4 | € 590,00 |
| 5 - 9 | € 568,50 |
| 10 - 24 | € 561,37 |
| 25 - 49 | € 551,67 |
| 50+ | € 539,42 |
Tehnička dokumentacija
Tehnički podaci
Proizvođač
ABBProduct Type
Safety Module
Series
GATE-D2
Sub Type
Gateway
Mount Type
DIN Rail
For Use With
DeviceNet
Supply Voltage
24 V
Normal State Configuration
NO/2 NC
Number of Inputs
5
Number of Outputs
5
Terminal Type
Spring Clamp
Power Rating
3kW
Hazardous Area Certification
No
Standards/Approvals
No
Detalji o proizvodu
Pluto Gateways For Network Connection
The gateways are devices for transfer of data in both directions between the Pluto bus and other fieldbuses. They are made in these versions; GATE-D1 for DeviceNet (733-4849), GATE-E1 for Ethernet using Modbus A second usage for GATE-D1 and GATE-C1 is as a CAN-bridge (repeater) which transfers CAN telegrams between two CAN-buses. This can be useful when long cables are needed. With CANbridge the usage is not limited to any special protocol such as the Pluto CAN bus system, but it can be used for most CAN bus systems.