Aim-TTi TGR6000 RF Signal Generator, 10MHz min, 6GHz max
Tehnička dokumentacija
Tehnički podaci
Proizvođač
Aim-TTiModel Number
TGR6000
Frequency Resolution
10Hz
Maximum Frequency Range Sinewave
6GHz
Maximum Frequency Range (Sinewave)
6GHz
Minimum Frequency Range Sinewave
10MHz
Minimum Frequency Range (Sinewave)
10mHz
Time Base Accuracy
<±1ppm
Output Impedance
50Ω
Interface Type
GPIB, LAN, RS232, USB
Sweep
Linear, Logarithmic
Plug Type
Type C - European Plug, Type G - British 3-pin
Maximum Operating Temperature
+40°C
Length
350mm
Minimum Operating Temperature
+5°C
Model Number (p)
TGR 6000
Inputs
AC In, Reference In, Trig In
Zemlja podrijetla
United Kingdom
Detalji o proizvodu
Aim-TTi TGR6000 6GHz RF Signal Generator
The TGR6000 is a low-cost 6GHz signal generator intended for CW (carrier wave) applications where modulation is not required. Low phase noise is matched by low leakage, low residual FM and spurii. The internal timebase has a 1ppm stability, and an external frequency reference can be used. Sophisticated sweep functions enable the frequency and/or amplitude to be swept over the full range of each in a single sweep.
Supplied with
Operating manual, driver software, power lead
Informacije o stanju skladišta trenutno nisu dostupne.
Provjerite ponovno kasnije.
P.O.A.
1
P.O.A.
1
Tehnička dokumentacija
Tehnički podaci
Proizvođač
Aim-TTiModel Number
TGR6000
Frequency Resolution
10Hz
Maximum Frequency Range Sinewave
6GHz
Maximum Frequency Range (Sinewave)
6GHz
Minimum Frequency Range Sinewave
10MHz
Minimum Frequency Range (Sinewave)
10mHz
Time Base Accuracy
<±1ppm
Output Impedance
50Ω
Interface Type
GPIB, LAN, RS232, USB
Sweep
Linear, Logarithmic
Plug Type
Type C - European Plug, Type G - British 3-pin
Maximum Operating Temperature
+40°C
Length
350mm
Minimum Operating Temperature
+5°C
Model Number (p)
TGR 6000
Inputs
AC In, Reference In, Trig In
Zemlja podrijetla
United Kingdom
Detalji o proizvodu
Aim-TTi TGR6000 6GHz RF Signal Generator
The TGR6000 is a low-cost 6GHz signal generator intended for CW (carrier wave) applications where modulation is not required. Low phase noise is matched by low leakage, low residual FM and spurii. The internal timebase has a 1ppm stability, and an external frequency reference can be used. Sophisticated sweep functions enable the frequency and/or amplitude to be swept over the full range of each in a single sweep.
Supplied with
Operating manual, driver software, power lead