Allegro Microsystems Through Hole Chopper Stabilised Precision Hall Effect Switch 3 V 24 V, SIP, 3-Pin
Tehnička dokumentacija
Tehnički podaci
Proizvođač
Allegro MicrosystemsProduct Type
Chopper Stabilised Precision Hall Effect Switch
Sensor Type
Hall Effect Sensors
Technology
Chopper Stabilised Hall Effect
Mount Type
Through Hole
Magnetic Type
Unipolar
Maximum Frequency Response
800kHz
Minimum Supply Voltage
3V
Package Type
SIP
Maximum Supply Voltage
24V
Minimum Operating Temperature
-40°C
Pin Count
3
Maximum Operating Temperature
85°C
Width
1.52 mm
Series
A1120
Height
3.02mm
Length
4.09mm
Standards/Approvals
RoHS, 100% matte tin plated leadframe, Lead (Pb) Free
Supply Current
4mA
Response Time
25μs
Automotive Standard
AEC-Q100
Detalji o proizvodu
A1120/1/2/3/5 Chopper Stabilised Hall Effect Sensor Switches, Allegro Microsystems
The Allegro Microsystems A1120, A1121, A1122, A1123, and A1125 Hall-effect, unipolar switches are temperature-stable and stress-resistant sensor ICs. High temperature performance is made possible through dynamic offset cancellation, which reduces the residual offset voltage normally caused by device over-molding, temperature dependencies, and thermal stress.
They include a voltage regulator, Hall-voltage generator, small-signal amplifier, chopper stabilisation, Schmitt trigger, and a short circuit protected open-drain output to sink up to 25 mA. The voltage regulator enables supply voltages of 3 V to 24 V.
For the A1120, A1121, A1122, and A1123, a south pole turns on the output and removal turns off the output. For the A1125, it is reversed and the south pole turns off the A1125 output.
Hall Effect Sensors, Allegro MicroSystems
Zamisliti. Stvoriti. Surađivati
PRIDRUŽITE SE BESPLATNO
Bez skrivenih naknada!
- Preuzmite i koristite naš softver DesignSpark za svoje PCB i 3D mehaničke dizajne
- Pregledajte i doprinesite sadržaju internet stranice i foruma
- Preuzmite 3D modele, sheme i otiske s više od milijun proizvoda
Informacije o stanju skladišta trenutno nisu dostupne.
€ 26,50
€ 1,06 Each (Supplied on a Reel) (bez PDV-a)
€ 33,12
€ 1,325 Each (Supplied on a Reel) (s PDV-om)
25
€ 26,50
€ 1,06 Each (Supplied on a Reel) (bez PDV-a)
€ 33,12
€ 1,325 Each (Supplied on a Reel) (s PDV-om)
Informacije o stanju skladišta trenutno nisu dostupne.
25
| količina | jedinična cijena | Po kolut |
|---|---|---|
| 25 - 95 | € 1,06 | € 5,30 |
| 100 - 245 | € 0,90 | € 4,50 |
| 250 - 495 | € 0,89 | € 4,45 |
| 500+ | € 0,86 | € 4,30 |
Zamisliti. Stvoriti. Surađivati
PRIDRUŽITE SE BESPLATNO
Bez skrivenih naknada!
- Preuzmite i koristite naš softver DesignSpark za svoje PCB i 3D mehaničke dizajne
- Pregledajte i doprinesite sadržaju internet stranice i foruma
- Preuzmite 3D modele, sheme i otiske s više od milijun proizvoda
Tehnička dokumentacija
Tehnički podaci
Proizvođač
Allegro MicrosystemsProduct Type
Chopper Stabilised Precision Hall Effect Switch
Sensor Type
Hall Effect Sensors
Technology
Chopper Stabilised Hall Effect
Mount Type
Through Hole
Magnetic Type
Unipolar
Maximum Frequency Response
800kHz
Minimum Supply Voltage
3V
Package Type
SIP
Maximum Supply Voltage
24V
Minimum Operating Temperature
-40°C
Pin Count
3
Maximum Operating Temperature
85°C
Width
1.52 mm
Series
A1120
Height
3.02mm
Length
4.09mm
Standards/Approvals
RoHS, 100% matte tin plated leadframe, Lead (Pb) Free
Supply Current
4mA
Response Time
25μs
Automotive Standard
AEC-Q100
Detalji o proizvodu
A1120/1/2/3/5 Chopper Stabilised Hall Effect Sensor Switches, Allegro Microsystems
The Allegro Microsystems A1120, A1121, A1122, A1123, and A1125 Hall-effect, unipolar switches are temperature-stable and stress-resistant sensor ICs. High temperature performance is made possible through dynamic offset cancellation, which reduces the residual offset voltage normally caused by device over-molding, temperature dependencies, and thermal stress.
They include a voltage regulator, Hall-voltage generator, small-signal amplifier, chopper stabilisation, Schmitt trigger, and a short circuit protected open-drain output to sink up to 25 mA. The voltage regulator enables supply voltages of 3 V to 24 V.
For the A1120, A1121, A1122, and A1123, a south pole turns on the output and removal turns off the output. For the A1125, it is reversed and the south pole turns off the A1125 output.
Hall Effect Sensors, Allegro MicroSystems
Zamisliti. Stvoriti. Surađivati
PRIDRUŽITE SE BESPLATNO
Bez skrivenih naknada!
- Preuzmite i koristite naš softver DesignSpark za svoje PCB i 3D mehaničke dizajne
- Pregledajte i doprinesite sadržaju internet stranice i foruma
- Preuzmite 3D modele, sheme i otiske s više od milijun proizvoda