Allegro Microsystems Surface Hall Effect Sensor 2.5 V 3.5 V, SOT-23, 3-Pin

RS kataloški broj:: 680-7125Probna marka: Allegro MicrosystemsProizvođački broj:: A3212ELHLT-T
brand-logo
Prikaži sve u Motion Sensor ICs

Tehnička dokumentacija

Tehnički podaci

Product Type

Hall Effect Sensor

Sensor Type

Hall Effect Sensors

Technology

CMOS, Chopper Stabilised

Mount Type

Surface

Magnetic Type

Omnipolar

Maximum Frequency Response

340kHz

Minimum Supply Voltage

2.5V

Package Type

SOT-23

Maximum Supply Voltage

3.5V

Minimum Operating Temperature

-40°C

Pin Count

3

Maximum Operating Temperature

85°C

Width

1.91 mm

Series

A3211A3212

Height

0.95mm

Length

2.98mm

Standards/Approvals

AEC-Q100

Supply Current

2mA

Response Time

45μs

Automotive Standard

AEC-Q100

Detalji o proizvodu

A3211/2 Micropower, Ultra Sensitive Hall Effect Switches, Allegro Microsystems

The A3211/2 are ultrasensitive, pole independent, Hall-effect switches with latched digital output. Their 2.5 V to 3.5 V operation and unique clocking scheme reduces the average operating power to less than 15 μW with a 2.75 V supply.

Either a north or south pole turns on the output in the A3212 and removing the magnetic field turns the output is off. This is reversed on the A3211.

Chopper stabilisation improves stability which reduces the residual offset voltage normally caused by device overmolding, temperature dependencies, and thermal stress.

Included on the chip is a Hall-voltage generator, small-signal amplifier, chopper stabilisation, a latch, and a MOSFET output.

Hall Effect Sensors, Allegro MicroSystems

Zamisliti. Stvoriti. Surađivati

PRIDRUŽITE SE BESPLATNO

Bez skrivenih naknada!

design-spark
design-spark
  • Preuzmite i koristite naš softver DesignSpark za svoje PCB i 3D mehaničke dizajne
  • Pregledajte i doprinesite sadržaju internet stranice i foruma
  • Preuzmite 3D modele, sheme i otiske s više od milijun proizvoda
Kliknite ovdje kako biste saznali više
Prikaži sve u Motion Sensor ICs

Informacije o stanju skladišta trenutno nisu dostupne.

€ 4,10

€ 0,82 Each (Supplied on a Reel) (bez PDV-a)

€ 5,12

€ 1,025 Each (Supplied on a Reel) (s PDV-om)

Allegro Microsystems Surface Hall Effect Sensor 2.5 V 3.5 V, SOT-23, 3-Pin
Odaberite vrstu pakiranja

€ 4,10

€ 0,82 Each (Supplied on a Reel) (bez PDV-a)

€ 5,12

€ 1,025 Each (Supplied on a Reel) (s PDV-om)

Allegro Microsystems Surface Hall Effect Sensor 2.5 V 3.5 V, SOT-23, 3-Pin

Informacije o stanju skladišta trenutno nisu dostupne.

Odaberite vrstu pakiranja

Zamisliti. Stvoriti. Surađivati

PRIDRUŽITE SE BESPLATNO

Bez skrivenih naknada!

design-spark
design-spark
  • Preuzmite i koristite naš softver DesignSpark za svoje PCB i 3D mehaničke dizajne
  • Pregledajte i doprinesite sadržaju internet stranice i foruma
  • Preuzmite 3D modele, sheme i otiske s više od milijun proizvoda
Kliknite ovdje kako biste saznali više

Tehnička dokumentacija

Tehnički podaci

Product Type

Hall Effect Sensor

Sensor Type

Hall Effect Sensors

Technology

CMOS, Chopper Stabilised

Mount Type

Surface

Magnetic Type

Omnipolar

Maximum Frequency Response

340kHz

Minimum Supply Voltage

2.5V

Package Type

SOT-23

Maximum Supply Voltage

3.5V

Minimum Operating Temperature

-40°C

Pin Count

3

Maximum Operating Temperature

85°C

Width

1.91 mm

Series

A3211A3212

Height

0.95mm

Length

2.98mm

Standards/Approvals

AEC-Q100

Supply Current

2mA

Response Time

45μs

Automotive Standard

AEC-Q100

Detalji o proizvodu

A3211/2 Micropower, Ultra Sensitive Hall Effect Switches, Allegro Microsystems

The A3211/2 are ultrasensitive, pole independent, Hall-effect switches with latched digital output. Their 2.5 V to 3.5 V operation and unique clocking scheme reduces the average operating power to less than 15 μW with a 2.75 V supply.

Either a north or south pole turns on the output in the A3212 and removing the magnetic field turns the output is off. This is reversed on the A3211.

Chopper stabilisation improves stability which reduces the residual offset voltage normally caused by device overmolding, temperature dependencies, and thermal stress.

Included on the chip is a Hall-voltage generator, small-signal amplifier, chopper stabilisation, a latch, and a MOSFET output.

Hall Effect Sensors, Allegro MicroSystems

Zamisliti. Stvoriti. Surađivati

PRIDRUŽITE SE BESPLATNO

Bez skrivenih naknada!

design-spark
design-spark
  • Preuzmite i koristite naš softver DesignSpark za svoje PCB i 3D mehaničke dizajne
  • Pregledajte i doprinesite sadržaju internet stranice i foruma
  • Preuzmite 3D modele, sheme i otiske s više od milijun proizvoda
Kliknite ovdje kako biste saznali više