Allen Bradley Guardmaster 1601N Safety Edge Sensor, Protected Area 1.5m, SET Wire Lead
Tehnička dokumentacija
Tehnički podaci
Range
Safedge
Protected Area
1.5m
Manufacturer k.i.m.
Allen Bradley Guardmaster
Series
440-F
Length
43mm
Width
28.5mm
Profile
1601N
Terminal Type
SET Wire Lead
IP Rating
IP67
Material
EPDM, NBR/CR
Detalji o proizvodu
Safedge Profiles
The Safedge pressure sensitive system is supplied in two popular profiles, with cushion factor over travel distances of 5mm and 19mm. The cushion factor is the distance the profile can be depressed after a signal has been generated.
It is mounted on an aluminium C rail (included) and is supplied in 1, 1.5 and 2m lengths that may be cut and joined in series or parallel to support a wide range of industrial applications such as power operated doors, guided vehicles and moving machinery beds.
The Safedge profile uses a combination of non-conductive rubber and flexible wire cored conductive rubber bonded together enabling it to return to its original shape even after repeated compressions.
It has no rigid internal parts to damage the rubber profile or cause fatigue failures after prolonged use. The multi-stranded copper wire core throughout the length of the strip also insures that there are no problems of resistance build up on long lengths.
A range of accessories for end termination and 90° active corner joints are also available.
Safety Edge
Informacije o stanju skladišta trenutno nisu dostupne.
Proverite ponovno kasnije.
RSD 77.380
Each (bez PDV-a)
RSD 92.856
Each (s PDV-om)
1
RSD 77.380
Each (bez PDV-a)
RSD 92.856
Each (s PDV-om)
1
Tehnička dokumentacija
Tehnički podaci
Range
Safedge
Protected Area
1.5m
Manufacturer k.i.m.
Allen Bradley Guardmaster
Series
440-F
Length
43mm
Width
28.5mm
Profile
1601N
Terminal Type
SET Wire Lead
IP Rating
IP67
Material
EPDM, NBR/CR
Detalji o proizvodu
Safedge Profiles
The Safedge pressure sensitive system is supplied in two popular profiles, with cushion factor over travel distances of 5mm and 19mm. The cushion factor is the distance the profile can be depressed after a signal has been generated.
It is mounted on an aluminium C rail (included) and is supplied in 1, 1.5 and 2m lengths that may be cut and joined in series or parallel to support a wide range of industrial applications such as power operated doors, guided vehicles and moving machinery beds.
The Safedge profile uses a combination of non-conductive rubber and flexible wire cored conductive rubber bonded together enabling it to return to its original shape even after repeated compressions.
It has no rigid internal parts to damage the rubber profile or cause fatigue failures after prolonged use. The multi-stranded copper wire core throughout the length of the strip also insures that there are no problems of resistance build up on long lengths.
A range of accessories for end termination and 90° active corner joints are also available.