Analog Devices, 1-Channel DC/DC Converter, Adjustable, 35 V, 1.2 V, 1.5 A 8-Pin, MSOP
Tehnička dokumentacija
Tehnički podaci
Proizvođač
Analog DevicesProduct Type
DC/DC Converter
Maximum Output Voltage
35V
Minimum Input Voltage
3V
Maximum Input Voltage
25V
Minimum Output Current
1.5A
Maximum Output Current
3A
Number of Outputs
1
Topology
Step Up
Output Type
Adjustable
Maximum Switching Frequency
1.5MHz
Mount Type
Surface
Package Type
MSOP
Minimum Operating Temperature
-40°C
Pin Count
8
Maximum Operating Temperature
125°C
Width
3 mm
Height
0.86mm
Length
3mm
Standards/Approvals
No
Series
LT1961
Minimum Output Voltage
1.2V
Automotive Standard
No
Detalji o proizvodu
SEPIC Regulators, Linear Technology
A range of SEPIC DC-DC Converters from Linear Technology which can be used in applications where the output voltage may be either higher or lower than the input voltage. The SEPIC (Single-Ended Primary-Inductor Converter) topology also allows these converters to produce a negative output from a positive input voltage. Some of these switching regulators include features such as multiple outputs, programmable current limit, low battery detection and burst-mode operation.
Switching Voltage Regulators, Linear Technology
Linear Technology product series of synchronous and non-synchronous internal switching regulator ICs offer high efficiency plus a wide input voltage range and switching frequencies up to 4MHz.
The controllers span over several types of configurations from buck (step-down), boost (step-up), buck-boost, forward, Isolated, Inverting and flyback controllers. The Flyback, Forward and Isolated Controllers primary and secondary side provide a solution to help replace the DC/DC bricks that get used in back-plane power conversion.
Zamisliti. Stvoriti. Surađivati
PRIDRUŽITE SE BESPLATNO
Bez skrivenih naknada!
- Preuzmite i koristite naš softver DesignSpark za svoje PCB i 3D mehaničke dizajne
- Pregledajte i doprinesite sadržaju internet stranice i foruma
- Preuzmite 3D modele, sheme i otiske s više od milijun proizvoda
Informacije o stanju skladišta trenutno nisu dostupne.
€ 65,50
€ 6,55 Each (Supplied in a Tube) (bez PDV-a)
€ 81,88
€ 8,19 Each (Supplied in a Tube) (s PDV-om)
Proizvodno pakiranje (cijev)
10
€ 65,50
€ 6,55 Each (Supplied in a Tube) (bez PDV-a)
€ 81,88
€ 8,19 Each (Supplied in a Tube) (s PDV-om)
Informacije o stanju skladišta trenutno nisu dostupne.
Proizvodno pakiranje (cijev)
10
| količina | jedinična cijena |
|---|---|
| 10 - 24 | € 6,55 |
| 25+ | € 5,55 |
Zamisliti. Stvoriti. Surađivati
PRIDRUŽITE SE BESPLATNO
Bez skrivenih naknada!
- Preuzmite i koristite naš softver DesignSpark za svoje PCB i 3D mehaničke dizajne
- Pregledajte i doprinesite sadržaju internet stranice i foruma
- Preuzmite 3D modele, sheme i otiske s više od milijun proizvoda
Tehnička dokumentacija
Tehnički podaci
Proizvođač
Analog DevicesProduct Type
DC/DC Converter
Maximum Output Voltage
35V
Minimum Input Voltage
3V
Maximum Input Voltage
25V
Minimum Output Current
1.5A
Maximum Output Current
3A
Number of Outputs
1
Topology
Step Up
Output Type
Adjustable
Maximum Switching Frequency
1.5MHz
Mount Type
Surface
Package Type
MSOP
Minimum Operating Temperature
-40°C
Pin Count
8
Maximum Operating Temperature
125°C
Width
3 mm
Height
0.86mm
Length
3mm
Standards/Approvals
No
Series
LT1961
Minimum Output Voltage
1.2V
Automotive Standard
No
Detalji o proizvodu
SEPIC Regulators, Linear Technology
A range of SEPIC DC-DC Converters from Linear Technology which can be used in applications where the output voltage may be either higher or lower than the input voltage. The SEPIC (Single-Ended Primary-Inductor Converter) topology also allows these converters to produce a negative output from a positive input voltage. Some of these switching regulators include features such as multiple outputs, programmable current limit, low battery detection and burst-mode operation.
Switching Voltage Regulators, Linear Technology
Linear Technology product series of synchronous and non-synchronous internal switching regulator ICs offer high efficiency plus a wide input voltage range and switching frequencies up to 4MHz.
The controllers span over several types of configurations from buck (step-down), boost (step-up), buck-boost, forward, Isolated, Inverting and flyback controllers. The Flyback, Forward and Isolated Controllers primary and secondary side provide a solution to help replace the DC/DC bricks that get used in back-plane power conversion.
Zamisliti. Stvoriti. Surađivati
PRIDRUŽITE SE BESPLATNO
Bez skrivenih naknada!
- Preuzmite i koristite naš softver DesignSpark za svoje PCB i 3D mehaničke dizajne
- Pregledajte i doprinesite sadržaju internet stranice i foruma
- Preuzmite 3D modele, sheme i otiske s više od milijun proizvoda