Tehnička dokumentacija
Tehnički podaci
Proizvođač
AssemtechContact Configuration
SPST
Product Type
Reed Switch
Maximum Switching Current
500mA
Maximum Switching Power
10W
Maximum Switching Voltage
200V
Contact Resistance
120mΩ
Contact Material
Rhodium
Maximum Release Time
30μs
Operating Time Including Bounce
0.15ms
AT Value Range
18 to 32 AT
Terminal Type
Wire
Mount Type
PCB
Minimum Operating Temperature
-55°C
Width
2.54 mm
Maximum Operating Temperature
125°C
Length
14.5mm
Standards/Approvals
ISO
Series
RI
Zemlja podrijetla
Belgium
Detalji o proizvodu
Form A & C Reed Switches
These dry-reed switches have been hermetically sealed in a gas-filled glass envelope. Actuation is done with an electro-magnet, a permanent magnet or a combination of both. If you prefer, they can be placed alongside a coil and actuated when a current is applied to the coil. They feature single pole, single throw, normally open contacts and have two magnetically actuated reeds.
There is a wide selection to choose from. You can select different lengths and each length has various sensitivity options.
Approvals
UL, CSA
Informacije o stanju skladišta trenutno nisu dostupne.
€ 18,90
€ 1,89 komadno (u vrećici od 10) (bez PDV-a)
€ 23,62
€ 2,362 komadno (u vrećici od 10) (s PDV-om)
10
€ 18,90
€ 1,89 komadno (u vrećici od 10) (bez PDV-a)
€ 23,62
€ 2,362 komadno (u vrećici od 10) (s PDV-om)
Informacije o stanju skladišta trenutno nisu dostupne.
10
| količina | jedinična cijena | Po vrećica |
|---|---|---|
| 10 - 40 | € 1,89 | € 18,90 |
| 50+ | € 1,76 | € 17,60 |
Tehnička dokumentacija
Tehnički podaci
Proizvođač
AssemtechContact Configuration
SPST
Product Type
Reed Switch
Maximum Switching Current
500mA
Maximum Switching Power
10W
Maximum Switching Voltage
200V
Contact Resistance
120mΩ
Contact Material
Rhodium
Maximum Release Time
30μs
Operating Time Including Bounce
0.15ms
AT Value Range
18 to 32 AT
Terminal Type
Wire
Mount Type
PCB
Minimum Operating Temperature
-55°C
Width
2.54 mm
Maximum Operating Temperature
125°C
Length
14.5mm
Standards/Approvals
ISO
Series
RI
Zemlja podrijetla
Belgium
Detalji o proizvodu
Form A & C Reed Switches
These dry-reed switches have been hermetically sealed in a gas-filled glass envelope. Actuation is done with an electro-magnet, a permanent magnet or a combination of both. If you prefer, they can be placed alongside a coil and actuated when a current is applied to the coil. They feature single pole, single throw, normally open contacts and have two magnetically actuated reeds.
There is a wide selection to choose from. You can select different lengths and each length has various sensitivity options.
Approvals
UL, CSA
