Assemtech SPST-NO PCB Reed Switch 500 mA 200 V
Tehnička dokumentacija
Tehnički podaci
Proizvođač
AssemtechProduct Type
Reed Switch
Contact Configuration
SPST-NO
Maximum Switching Current
500mA
Maximum Switching Power
10W
Maximum Switching Voltage
200V
Contact Resistance
100mΩ
Contact Material
Ruthenium on Gold
Maximum Release Time
30μs
Operating Time Including Bounce
0.25ms
AT Value Range
28 to 52 AT
Terminal Type
Wire
Mount Type
PCB
Minimum Operating Temperature
-55°C
Width
2.54 mm
Maximum Operating Temperature
125°C
Length
14.5mm
Standards/Approvals
ISO
Series
RI
Zemlja podrijetla
Netherlands
Detalji o proizvodu
Form A & C Reed Switches
These dry-reed switches have been hermetically sealed in a gas-filled glass envelope. Actuation is done with an electro-magnet, a permanent magnet or a combination of both. If you prefer, they can be placed alongside a coil and actuated when a current is applied to the coil. They feature single pole, single throw, normally open contacts and have two magnetically actuated reeds.
There is a wide selection to choose from. You can select different lengths and each length has various sensitivity options.
Approvals
UL, CSA
Informacije o stanju skladišta trenutno nisu dostupne.
€ 19,90
€ 1,99 komadno (u vrećici od 10) (bez PDV-a)
€ 24,88
€ 2,488 komadno (u vrećici od 10) (s PDV-om)
10
€ 19,90
€ 1,99 komadno (u vrećici od 10) (bez PDV-a)
€ 24,88
€ 2,488 komadno (u vrećici od 10) (s PDV-om)
Informacije o stanju skladišta trenutno nisu dostupne.
10
Tehnička dokumentacija
Tehnički podaci
Proizvođač
AssemtechProduct Type
Reed Switch
Contact Configuration
SPST-NO
Maximum Switching Current
500mA
Maximum Switching Power
10W
Maximum Switching Voltage
200V
Contact Resistance
100mΩ
Contact Material
Ruthenium on Gold
Maximum Release Time
30μs
Operating Time Including Bounce
0.25ms
AT Value Range
28 to 52 AT
Terminal Type
Wire
Mount Type
PCB
Minimum Operating Temperature
-55°C
Width
2.54 mm
Maximum Operating Temperature
125°C
Length
14.5mm
Standards/Approvals
ISO
Series
RI
Zemlja podrijetla
Netherlands
Detalji o proizvodu
Form A & C Reed Switches
These dry-reed switches have been hermetically sealed in a gas-filled glass envelope. Actuation is done with an electro-magnet, a permanent magnet or a combination of both. If you prefer, they can be placed alongside a coil and actuated when a current is applied to the coil. They feature single pole, single throw, normally open contacts and have two magnetically actuated reeds.
There is a wide selection to choose from. You can select different lengths and each length has various sensitivity options.
Approvals
UL, CSA