Carlo Gavazzi Current, Voltage Monitoring Relay, SPDT, 0.4 → 500 V ac, 2 → 500V dc, DIN Rail
Tehnička dokumentacija
Tehnički podaci
Proizvođač
Carlo GavazziMonitoring Application
Current, Voltage
Voltage Sensing Range
0.4 → 500 V ac, 2 → 500V dc
Contact Configuration
SPDT
Voltage Sensitivity
Overvoltage
Mounting Type
DIN Rail
Current Sensitivity
Overcurrent
Time Delay
<300ms
Series
PUA01
Maximum Voltage Sensed
500V ac/dc
Height
80mm
Length
94mm
Minimum Voltage Sensed
0.4V ac
Operating Temperature Range
+60°C
Minimum Operating Temperature
-20°C
Width
36mm
Maximum Operating Temperature
+60°C
Dimensions
94 x 36 x 80mm
Zemlja podrijetla
Italy
Detalji o proizvodu
Over Voltage - Over Current Monitoring Relay
Monitoring relays from Carlo Gavazzi can also be used as 1-phase or 3- phase over current monitoring relays when connected with MI or MP current transformers.Owing to the built-in latch function, the ON-position of the relay output can be maintained. The red LED indicates the alarm status.
€ 164,36
€ 164,36 komadno (bez PDV-a)
€ 205,45
€ 205,45 komadno (s PDV-om)
1
€ 164,36
€ 164,36 komadno (bez PDV-a)
€ 205,45
€ 205,45 komadno (s PDV-om)
Informacije o stanju skladišta trenutno nisu dostupne.
1
Informacije o stanju skladišta trenutno nisu dostupne.
| količina | jedinična cijena |
|---|---|
| 1 - 4 | € 164,36 |
| 5+ | € 159,98 |
Tehnička dokumentacija
Tehnički podaci
Proizvođač
Carlo GavazziMonitoring Application
Current, Voltage
Voltage Sensing Range
0.4 → 500 V ac, 2 → 500V dc
Contact Configuration
SPDT
Voltage Sensitivity
Overvoltage
Mounting Type
DIN Rail
Current Sensitivity
Overcurrent
Time Delay
<300ms
Series
PUA01
Maximum Voltage Sensed
500V ac/dc
Height
80mm
Length
94mm
Minimum Voltage Sensed
0.4V ac
Operating Temperature Range
+60°C
Minimum Operating Temperature
-20°C
Width
36mm
Maximum Operating Temperature
+60°C
Dimensions
94 x 36 x 80mm
Zemlja podrijetla
Italy
Detalji o proizvodu
Over Voltage - Over Current Monitoring Relay
Monitoring relays from Carlo Gavazzi can also be used as 1-phase or 3- phase over current monitoring relays when connected with MI or MP current transformers.Owing to the built-in latch function, the ON-position of the relay output can be maintained. The red LED indicates the alarm status.