Chauvin Arnoux PEL 105 USB Data Logger Data Logger, Bluetooth, Ethernet, USB, Wi-Fi
Tehnička dokumentacija
Tehnički podaci
Proizvođač
Chauvin ArnouxNumber Of Input Channels
9
Model Number
PEL 105
Measurement Parameters
Current, Energy, Frequency, Harmonics, Power, Voltage
Sensor Type
Current Sensor, Voltage Probes
Interface Type
Bluetooth, Ethernet, USB, Wi-Fi
Data Logger Type
USB Data Logger
Maximum Voltage Measurement
1000 V dc, 1000 V ac @ 50/60 Hz, 600 V ac @ 400 Hz
Power Source
From Unit Under Test, Mains
IP Rating
IP67
Minimum Operating Temperature
-20°C
Maximum Operating Temperature
+50°C
Maximum Current Measurement
5000 A dc, 10000 A ac
Display Type
LCD
Best Current Measurement Accuracy
±0.5 %
Includes
1 bag, 1 safety datasheet, 1 SD card, 1 set of inserts/rings, 1 set of waterproof plugs, 1 USB cable, 5 black 1000 V CAT IV crocodile clips, 5 x 3 m black silicone cables straight banana / straight banana, operating manual on USB key, quick start-up guide
Battery Type
Rechargeable Battery
Best Voltage Measurement Accuracy
±0.2 % + 0.2V
Zemlja podrijetla
France
Detalji o proizvodu
PEL105 Power Energy Logger
The PEL 105 Power Energy Logger is designed to measure, record and analyse the power values (W, var, VA) and energy values (kWh, kvarh, kVAh). At the same time, they record the PF and the DPF. Recording is continuous with a sampling interval of 200 ms. It is ideal for outdoor installation directly on an electricity pole. With a 1000 V CAT IV safety rating. It can be used for measurements on all LV networks, including measurements of the neutral-earth voltage and the neutral current.
This standalone instrument is equipped with a self-powering system via its voltage inputs up to 1000 V. PEL 105 offers 5 voltage inputs and 4 current inputs. Compatible with a range of current sensors to make it easier to use, it also recognises the sensors automatically. The PEL 105 Power Energy Logger is simple to use with an all-terrain IP67 casing capable of withstanding shocks, UV rays and extreme temperatures.
The PEL 105 logger can also be installed as a fixed equipment, directly at the top of an electricity pole.
Supplied with
1 PEL 105 Data Logger, 5 x 3 m black silicone cables (straight banana/ straight banana), 5 black 1000 V CAT IV crocodile clips, 1 set inserts/rings, 1 set of waterproof plugs, 1 SD card, 1 USB cable, 1 bag, 1 safety datasheet, 1 quick startup guide and an operating manual on USB key.
Informacije o stanju skladišta trenutno nisu dostupne.
Provjerite ponovno kasnije.
P.O.A.
1
P.O.A.
1
Tehnička dokumentacija
Tehnički podaci
Proizvođač
Chauvin ArnouxNumber Of Input Channels
9
Model Number
PEL 105
Measurement Parameters
Current, Energy, Frequency, Harmonics, Power, Voltage
Sensor Type
Current Sensor, Voltage Probes
Interface Type
Bluetooth, Ethernet, USB, Wi-Fi
Data Logger Type
USB Data Logger
Maximum Voltage Measurement
1000 V dc, 1000 V ac @ 50/60 Hz, 600 V ac @ 400 Hz
Power Source
From Unit Under Test, Mains
IP Rating
IP67
Minimum Operating Temperature
-20°C
Maximum Operating Temperature
+50°C
Maximum Current Measurement
5000 A dc, 10000 A ac
Display Type
LCD
Best Current Measurement Accuracy
±0.5 %
Includes
1 bag, 1 safety datasheet, 1 SD card, 1 set of inserts/rings, 1 set of waterproof plugs, 1 USB cable, 5 black 1000 V CAT IV crocodile clips, 5 x 3 m black silicone cables straight banana / straight banana, operating manual on USB key, quick start-up guide
Battery Type
Rechargeable Battery
Best Voltage Measurement Accuracy
±0.2 % + 0.2V
Zemlja podrijetla
France
Detalji o proizvodu
PEL105 Power Energy Logger
The PEL 105 Power Energy Logger is designed to measure, record and analyse the power values (W, var, VA) and energy values (kWh, kvarh, kVAh). At the same time, they record the PF and the DPF. Recording is continuous with a sampling interval of 200 ms. It is ideal for outdoor installation directly on an electricity pole. With a 1000 V CAT IV safety rating. It can be used for measurements on all LV networks, including measurements of the neutral-earth voltage and the neutral current.
This standalone instrument is equipped with a self-powering system via its voltage inputs up to 1000 V. PEL 105 offers 5 voltage inputs and 4 current inputs. Compatible with a range of current sensors to make it easier to use, it also recognises the sensors automatically. The PEL 105 Power Energy Logger is simple to use with an all-terrain IP67 casing capable of withstanding shocks, UV rays and extreme temperatures.
The PEL 105 logger can also be installed as a fixed equipment, directly at the top of an electricity pole.
Supplied with
1 PEL 105 Data Logger, 5 x 3 m black silicone cables (straight banana/ straight banana), 5 black 1000 V CAT IV crocodile clips, 1 set inserts/rings, 1 set of waterproof plugs, 1 SD card, 1 USB cable, 1 bag, 1 safety datasheet, 1 quick startup guide and an operating manual on USB key.