Tehnička dokumentacija
Tehnički podaci
Proizvođač
CrouzetMonitoring Application
Phase, Voltage
Electrical Phase
3
Contact Configuration
SPDT
Voltage Sensing Range
183 → 528V ac
Voltage Sensitivity
Overvoltage, Undervoltage
Mounting Type
DIN Rail
Phase Sensitivity
Phase Asymmetry, Phase Failure, Phase Sequence
Time Delay
0.1 → 10s
Series
MWG
Height
92.6mm
Length
69mm
Minimum Voltage Sensed
183V ac
Operating Temperature Range
+50°C
Minimum Operating Temperature
-20°C
Width
17.5mm
Maximum Operating Temperature
+50°C
Dimensions
69 x 17.5 x 92.6mm
Maximum Voltage Sensed
528V ac
Zemlja podrijetla
Indonesia
Detalji o proizvodu
Multi Function Phase Control Relays 17.5mm - C-Lynx
3 phase network control relays monitor: the correct sequence of phases L1, L2, L3, the total phase failure - Undervoltage and overvoltage from 2% to 20% of Under Voltage Relay and Asymmetry rate from 5% to 15% of Under Voltage Relay. LEDs are used for fault signalling, if a fault persists for longer than the threshold crossing delay configured by the operator, the output relay opens and the LED R is extinguished.
Informacije o stanju skladišta trenutno nisu dostupne.
Provjerite ponovno kasnije.
€ 172,00
komadno (bez PDV-a)
€ 215,00
komadno (s PDV-om)
1
€ 172,00
komadno (bez PDV-a)
€ 215,00
komadno (s PDV-om)
1
Kupujte na veliko
količina | jedinična cijena |
---|---|
1 - 4 | € 172,00 |
5 - 9 | € 166,00 |
10 - 24 | € 164,00 |
25 - 49 | € 161,00 |
50+ | € 157,00 |
Tehnička dokumentacija
Tehnički podaci
Proizvođač
CrouzetMonitoring Application
Phase, Voltage
Electrical Phase
3
Contact Configuration
SPDT
Voltage Sensing Range
183 → 528V ac
Voltage Sensitivity
Overvoltage, Undervoltage
Mounting Type
DIN Rail
Phase Sensitivity
Phase Asymmetry, Phase Failure, Phase Sequence
Time Delay
0.1 → 10s
Series
MWG
Height
92.6mm
Length
69mm
Minimum Voltage Sensed
183V ac
Operating Temperature Range
+50°C
Minimum Operating Temperature
-20°C
Width
17.5mm
Maximum Operating Temperature
+50°C
Dimensions
69 x 17.5 x 92.6mm
Maximum Voltage Sensed
528V ac
Zemlja podrijetla
Indonesia
Detalji o proizvodu
Multi Function Phase Control Relays 17.5mm - C-Lynx
3 phase network control relays monitor: the correct sequence of phases L1, L2, L3, the total phase failure - Undervoltage and overvoltage from 2% to 20% of Under Voltage Relay and Asymmetry rate from 5% to 15% of Under Voltage Relay. LEDs are used for fault signalling, if a fault persists for longer than the threshold crossing delay configured by the operator, the output relay opens and the LED R is extinguished.