EA Elektro-Automatik EL 9000 Series Electronic Load, 0 → 4800 W, 0 → 750 V, 0 → 50 A
Tehnička dokumentacija
Tehnički podaci
Proizvođač
EA Elektro-AutomatikSeries
EL 9000
Load Type
Programmable
Constant Voltage Mode Range
0 → 750 V
Constant Current Mode Range
0 → 50 A
Constant Resistance Mode Range
0 → 20 Ω
Constant Wattage Mode Range
0 → 4800 W
Rack Units
4 U
Zemlja podrijetla
Germany
Detalji o proizvodu
EA-EL 9000 Series
The microprocessor controlled loads of the series EA-EL 9000 (2400W - 7200W) accomplish most requirements in modern load concepts for industrial and R&D areas. Four common regulation modes - constant voltage (CV), constant current (CC), constant power (CP) and constant resistance (CR) - can be used in combination with any of three operation modes (A, B and A/B). In static operation the two values A and B can be set using a fine adjustment encoder. The user can switch between these two values, or an external source can be used via the trigger input. In dynamic operation the microcontroller switches between A and B according to programmed time and interval. For each value a pulse interval between 50μs and 100s can be set. In addition, a ramp up and down of between 30μs and 200ms can be set.
Elektro-Automatik
Cijena na upit
1
Cijena na upit
Informacije o stanju skladišta trenutno nisu dostupne.
1
Informacije o stanju skladišta trenutno nisu dostupne.
Tehnička dokumentacija
Tehnički podaci
Proizvođač
EA Elektro-AutomatikSeries
EL 9000
Load Type
Programmable
Constant Voltage Mode Range
0 → 750 V
Constant Current Mode Range
0 → 50 A
Constant Resistance Mode Range
0 → 20 Ω
Constant Wattage Mode Range
0 → 4800 W
Rack Units
4 U
Zemlja podrijetla
Germany
Detalji o proizvodu
EA-EL 9000 Series
The microprocessor controlled loads of the series EA-EL 9000 (2400W - 7200W) accomplish most requirements in modern load concepts for industrial and R&D areas. Four common regulation modes - constant voltage (CV), constant current (CC), constant power (CP) and constant resistance (CR) - can be used in combination with any of three operation modes (A, B and A/B). In static operation the two values A and B can be set using a fine adjustment encoder. The user can switch between these two values, or an external source can be used via the trigger input. In dynamic operation the microcontroller switches between A and B according to programmed time and interval. For each value a pulse interval between 50μs and 100s can be set. In addition, a ramp up and down of between 30μs and 200ms can be set.
Elektro-Automatik