Festo Pneumatic Guided Cylinder - 170844, 20mm Bore, 50mm Stroke, DFM Series, Double Acting
Tehnička dokumentacija
Tehnički podaci
Proizvođač
FestoStroke
50mm
Bore
20mm
Manufacturer Series
DFM
Action
Double
Bearing Type
Ball Bearing
Pneumatic Connection
M5
Maximum Operating Pressure
10 bar
Cushioning Type
Elastomer
Model Number p
170844
Dimensions
131 x 83 x 36mm
Weight
1.2kg
Maximum Operating Temperature
+80°C
Length
131mm
Height
36mm
Width
83mm
Minimum Operating Temperature
-20°C
Zemlja podrijetla
Germany
Detalji o proizvodu
DFM Pneumatic Guided Cylinders - Slide Bearing
Festo DFM series pneumatic guided cylinders are double acting drive and guide unit in a single housing. Four plain slide bearings on the large diameter guide rods provide high rigidity suitable for high loads. Designed for high load pneumatic applications such as clamping, stopping, material handling and lifting. The sturdy and precise aluminium construction is maintenance free and highly resistant to torque and lateral external forces. A compact design incorporates the piston rod as part of the guide body.
The DFM series of guided actuators have flexible cushioning plates to reduce noise during operation and increase service life. Integrated slots on the actuator body allow for incorporating proximity sensors to measure the linear motion of the piston. Air supply ports on both the top and side of the cylinder provide flexible positioning options.
Zamisliti. Stvoriti. Surađivati
PRIDRUŽITE SE BESPLATNO
Bez skrivenih naknada!
- Preuzmite i koristite naš softver DesignSpark za svoje PCB i 3D mehaničke dizajne
- Pregledajte i doprinesite sadržaju internet stranice i foruma
- Preuzmite 3D modele, sheme i otiske s više od milijun proizvoda
€ 458,82
€ 458,82 komadno (bez PDV-a)
€ 573,52
€ 573,52 komadno (s PDV-om)
1
€ 458,82
€ 458,82 komadno (bez PDV-a)
€ 573,52
€ 573,52 komadno (s PDV-om)
Informacije o stanju skladišta trenutno nisu dostupne.
1
Informacije o stanju skladišta trenutno nisu dostupne.
Zamisliti. Stvoriti. Surađivati
PRIDRUŽITE SE BESPLATNO
Bez skrivenih naknada!
- Preuzmite i koristite naš softver DesignSpark za svoje PCB i 3D mehaničke dizajne
- Pregledajte i doprinesite sadržaju internet stranice i foruma
- Preuzmite 3D modele, sheme i otiske s više od milijun proizvoda
Tehnička dokumentacija
Tehnički podaci
Proizvođač
FestoStroke
50mm
Bore
20mm
Manufacturer Series
DFM
Action
Double
Bearing Type
Ball Bearing
Pneumatic Connection
M5
Maximum Operating Pressure
10 bar
Cushioning Type
Elastomer
Model Number p
170844
Dimensions
131 x 83 x 36mm
Weight
1.2kg
Maximum Operating Temperature
+80°C
Length
131mm
Height
36mm
Width
83mm
Minimum Operating Temperature
-20°C
Zemlja podrijetla
Germany
Detalji o proizvodu
DFM Pneumatic Guided Cylinders - Slide Bearing
Festo DFM series pneumatic guided cylinders are double acting drive and guide unit in a single housing. Four plain slide bearings on the large diameter guide rods provide high rigidity suitable for high loads. Designed for high load pneumatic applications such as clamping, stopping, material handling and lifting. The sturdy and precise aluminium construction is maintenance free and highly resistant to torque and lateral external forces. A compact design incorporates the piston rod as part of the guide body.
The DFM series of guided actuators have flexible cushioning plates to reduce noise during operation and increase service life. Integrated slots on the actuator body allow for incorporating proximity sensors to measure the linear motion of the piston. Air supply ports on both the top and side of the cylinder provide flexible positioning options.
Zamisliti. Stvoriti. Surađivati
PRIDRUŽITE SE BESPLATNO
Bez skrivenih naknada!
- Preuzmite i koristite naš softver DesignSpark za svoje PCB i 3D mehaničke dizajne
- Pregledajte i doprinesite sadržaju internet stranice i foruma
- Preuzmite 3D modele, sheme i otiske s više od milijun proizvoda