Fluke Networks FI-525 Single & Multimode Fibre Optic Test Kit
Tehnička dokumentacija
Tehnički podaci
Proizvođač
Fluke NetworksProduct Type
Fibre Tester
Cable Type
Single & Multimode
Equipment Type
Fibre Optic Test Kit
Connector Type
ST, LC Port, LC, SC, FC Port
Resolution
1 μm
Interface Type
USB
Magnification
200
Battery Type
Nickel-Metal Hydride
Plug Type
3-Pin (Global)
Battery Life
3h
Width
80 mm
Height
39mm
Length
140mm
Power Source
Mains, Battery
Weight
275g
Standards/Approvals
IEC 62133, IEC 610101 3rd Edition
Includes
Adapter, Cord, Display, Battery
Minimum Operating Temperature
0°C
Model Number
FI-525
Maximum Operating Temperature
40°C
Zemlja podrijetla
Lithuania
Detalji o proizvodu
FI-525 FiberInspector Micro and Cleaning Kit
FI-525 FiberInspector Micro and Cleaning kit. Wet and dry cleaning supplies to remove contamination discovered during fiber inspection with the FI-500.
Dirty fibre optic endfaces are the major cause of problems in single-mode and multimode fibre optic systems. The FI-500 FiberInspector™ Micro removes the hassle associated with inspecting fibre end faces, especially in low light and high cable density situations.
FI-500 is designed to simplify the inspection process. The built-in PortBright flashlight helps you find the right port or cable. The small-profile probe fits into tight spots, and features push button controls for simple operation. AutoFocus provides a sharp view of the endface in a few seconds. While the pause button freezes the image on the crisp 320 x 240 display for more detailed inspection.
FI-500 FiberInspector Micro fills the gap between a manual scope and a fully automated inspection scope. It has the simplicity and practicality of a manual inspection scope, but with advanced features to reduce troubleshooting and inspection time.
Supplied with
FiberInspector™ Micro with probe, display, 4 UPC tips, case, rechargeable batteries, universal power adapter and cleaning kit
Informacije o stanju skladišta trenutno nisu dostupne.
Cijena na upit
1
Cijena na upit
Informacije o stanju skladišta trenutno nisu dostupne.
1
Tehnička dokumentacija
Tehnički podaci
Proizvođač
Fluke NetworksProduct Type
Fibre Tester
Cable Type
Single & Multimode
Equipment Type
Fibre Optic Test Kit
Connector Type
ST, LC Port, LC, SC, FC Port
Resolution
1 μm
Interface Type
USB
Magnification
200
Battery Type
Nickel-Metal Hydride
Plug Type
3-Pin (Global)
Battery Life
3h
Width
80 mm
Height
39mm
Length
140mm
Power Source
Mains, Battery
Weight
275g
Standards/Approvals
IEC 62133, IEC 610101 3rd Edition
Includes
Adapter, Cord, Display, Battery
Minimum Operating Temperature
0°C
Model Number
FI-525
Maximum Operating Temperature
40°C
Zemlja podrijetla
Lithuania
Detalji o proizvodu
FI-525 FiberInspector Micro and Cleaning Kit
FI-525 FiberInspector Micro and Cleaning kit. Wet and dry cleaning supplies to remove contamination discovered during fiber inspection with the FI-500.
Dirty fibre optic endfaces are the major cause of problems in single-mode and multimode fibre optic systems. The FI-500 FiberInspector™ Micro removes the hassle associated with inspecting fibre end faces, especially in low light and high cable density situations.
FI-500 is designed to simplify the inspection process. The built-in PortBright flashlight helps you find the right port or cable. The small-profile probe fits into tight spots, and features push button controls for simple operation. AutoFocus provides a sharp view of the endface in a few seconds. While the pause button freezes the image on the crisp 320 x 240 display for more detailed inspection.
FI-500 FiberInspector Micro fills the gap between a manual scope and a fully automated inspection scope. It has the simplicity and practicality of a manual inspection scope, but with advanced features to reduce troubleshooting and inspection time.
Supplied with
FiberInspector™ Micro with probe, display, 4 UPC tips, case, rechargeable batteries, universal power adapter and cleaning kit