FTDI Chip Multiprotocol Transceiver 28-Pin SSOP, FT232RL-REEL
Tehnička dokumentacija
Tehnički podaci
Proizvođač
FTDI ChipProduct Type
Multiprotocol Transceiver
Number of Transmitters
1
Maximum Data Rate
3MBd
Number of Receivers
1
Number of Transceivers
1
Mount Type
Surface
Package Type
SSOP
Pin Count
28
Minimum Supply Voltage
1.8V
Maximum Supply Voltage
5.25V
Minimum Operating Temperature
-40°C
Maximum Operating Temperature
85°C
Interface Standards
UART
Height
1.75mm
Length
10.2mm
Standards/Approvals
No
Power Supply Type
Single
Supply Current
15mA
Automotive Standard
No
Zemlja podrijetla
Taiwan, Province Of China
Detalji o proizvodu
FT232R - USB to Serial UART with Clock Generator, FTDI Chip
The FTDI Chip FT232R is a USB to serial UART interface with optional clock generator output. Asynchronous and synchronous bit bang interface modes are also available. Together with EEPROM, clock circuit and USB resistors effectively makes it a "3 in 1" chip for some applications. The internally generated clock (6 MHz, 12 MHz, 24 MHz, and 48 MHz) can be used to drive a microcontroller or external logic.
A unique number, the FTDIChip-ID, is burnt into the device during manufacture and is readable over USB, thus forming the basis of a security dongle. It can then be used to protect customer application software from being copied. Royalty-free drivers for the most common operating systems are available from FTDI website. http://www.ftdichip.com
The FT232R is available in compact 28-pin SSOP (RS 406-580) and 32-pin QFN (RS 730-0168) packages.
Zamisliti. Stvoriti. Surađivati
PRIDRUŽITE SE BESPLATNO
Bez skrivenih naknada!
- Preuzmite i koristite naš softver DesignSpark za svoje PCB i 3D mehaničke dizajne
- Pregledajte i doprinesite sadržaju internet stranice i foruma
- Preuzmite 3D modele, sheme i otiske s više od milijun proizvoda
Informacije o stanju skladišta trenutno nisu dostupne.
€ 4,35
€ 4,35 komadno (bez PDV-a)
€ 5,44
€ 5,44 komadno (s PDV-om)
Standard
1
€ 4,35
€ 4,35 komadno (bez PDV-a)
€ 5,44
€ 5,44 komadno (s PDV-om)
Informacije o stanju skladišta trenutno nisu dostupne.
Standard
1
| količina | jedinična cijena |
|---|---|
| 1 - 19 | € 4,35 |
| 20 - 99 | € 3,65 |
| 100 - 499 | € 3,60 |
| 500+ | € 3,48 |
Zamisliti. Stvoriti. Surađivati
PRIDRUŽITE SE BESPLATNO
Bez skrivenih naknada!
- Preuzmite i koristite naš softver DesignSpark za svoje PCB i 3D mehaničke dizajne
- Pregledajte i doprinesite sadržaju internet stranice i foruma
- Preuzmite 3D modele, sheme i otiske s više od milijun proizvoda
Tehnička dokumentacija
Tehnički podaci
Proizvođač
FTDI ChipProduct Type
Multiprotocol Transceiver
Number of Transmitters
1
Maximum Data Rate
3MBd
Number of Receivers
1
Number of Transceivers
1
Mount Type
Surface
Package Type
SSOP
Pin Count
28
Minimum Supply Voltage
1.8V
Maximum Supply Voltage
5.25V
Minimum Operating Temperature
-40°C
Maximum Operating Temperature
85°C
Interface Standards
UART
Height
1.75mm
Length
10.2mm
Standards/Approvals
No
Power Supply Type
Single
Supply Current
15mA
Automotive Standard
No
Zemlja podrijetla
Taiwan, Province Of China
Detalji o proizvodu
FT232R - USB to Serial UART with Clock Generator, FTDI Chip
The FTDI Chip FT232R is a USB to serial UART interface with optional clock generator output. Asynchronous and synchronous bit bang interface modes are also available. Together with EEPROM, clock circuit and USB resistors effectively makes it a "3 in 1" chip for some applications. The internally generated clock (6 MHz, 12 MHz, 24 MHz, and 48 MHz) can be used to drive a microcontroller or external logic.
A unique number, the FTDIChip-ID, is burnt into the device during manufacture and is readable over USB, thus forming the basis of a security dongle. It can then be used to protect customer application software from being copied. Royalty-free drivers for the most common operating systems are available from FTDI website. http://www.ftdichip.com
The FT232R is available in compact 28-pin SSOP (RS 406-580) and 32-pin QFN (RS 730-0168) packages.
Zamisliti. Stvoriti. Surađivati
PRIDRUŽITE SE BESPLATNO
Bez skrivenih naknada!
- Preuzmite i koristite naš softver DesignSpark za svoje PCB i 3D mehaničke dizajne
- Pregledajte i doprinesite sadržaju internet stranice i foruma
- Preuzmite 3D modele, sheme i otiske s više od milijun proizvoda