Geckodrive Stepper Motor Controller, 7 A, 80 V dc
Tehnička dokumentacija
Tehnički podaci
Proizvođač
GeckodriveCurrent Rating
7 A
Voltage Rating
80 V dc
Overall Length
63.5mm
Overall Width
21mm
Overall Depth
65.5mm
Zemlja podrijetla
United States
Detalji o proizvodu
G203V - Stepper Drive
The G203V is the new generation CPLD-based microstep drive. It has short-circuit protection for the motor outputs, over-voltage and under-voltage protection, over-temperature protection, reversed power supply polarity protection and will survive accidental motor disconnects while powered-up. The “V” in G203V stands for “Vampire” as it is an unkillable drive.
The G203V uses a synchronous PWM design that is absolutely silent when the motor is stopped or turning slowly. It virtually eliminates stopped-motor heating regardless of power supply voltage. The G203V is a jumper-free drive. There are no internal user settings at all so there is no need to ever remove the drive cover at all.
Informacije o stanju skladišta trenutno nisu dostupne.
Provjerite ponovno kasnije.
€ 475,69
komadno (bez PDV-a)
€ 594,61
komadno (s PDV-om)
1
€ 475,69
komadno (bez PDV-a)
€ 594,61
komadno (s PDV-om)
1
Tehnička dokumentacija
Tehnički podaci
Proizvođač
GeckodriveCurrent Rating
7 A
Voltage Rating
80 V dc
Overall Length
63.5mm
Overall Width
21mm
Overall Depth
65.5mm
Zemlja podrijetla
United States
Detalji o proizvodu
G203V - Stepper Drive
The G203V is the new generation CPLD-based microstep drive. It has short-circuit protection for the motor outputs, over-voltage and under-voltage protection, over-temperature protection, reversed power supply polarity protection and will survive accidental motor disconnects while powered-up. The “V” in G203V stands for “Vampire” as it is an unkillable drive.
The G203V uses a synchronous PWM design that is absolutely silent when the motor is stopped or turning slowly. It virtually eliminates stopped-motor heating regardless of power supply voltage. The G203V is a jumper-free drive. There are no internal user settings at all so there is no need to ever remove the drive cover at all.