Harting Han E Female 16A Crimp Contact Minimum Wire Size 4mm² Maximum Wire Size 4mm²
Tehnička dokumentacija
Tehnički podaci
Proizvođač
HartingSeries
Han E
Accessory Type
Crimp Contact
Current Rating
16A
Minimum Wire Size mm²
4mm²
Minimum Wire Size (mm²)
4mm²
Maximum Wire Size mm²
4mm²
Gender
Female
Maximum Wire Size (mm²)
4mm²
Termination Method
Crimp
Zemlja podrijetla
Germany
Detalji o proizvodu
Han E® 16A Crimp Series
Harting contact inserts have a wide range of uses. Inserts are selected according to the desired number of poles and voltage and current ratings.
Warning
These connectors should not be mated or unmated under electrical load. Connectors of the same or different types arranged in a line should be polarised to prevent the possibility of a wrong connection.
Approvals
UL, CSA, SEV
Han E® 16A Crimp Series
These Han E® inserts are rated at 16A. They are intended for use with hoods and housings contained within ranges 5, 6, 7, & 8. These hood and housing ranges are associated to a specific Harting 'Size' number identifier. See the 'compatibility' table for details of this relationship, and stock numbers of hoods and housings that are typical of each range.
Informacije o stanju skladišta trenutno nisu dostupne.
Provjerite ponovno kasnije.
€ 8,51
komadno (u pakiranju od 100) (bez PDV-a)
€ 10,638
komadno (u pakiranju od 100) (s PDV-om)
100
€ 8,51
komadno (u pakiranju od 100) (bez PDV-a)
€ 10,638
komadno (u pakiranju od 100) (s PDV-om)
100
Kupujte na veliko
| količina | jedinična cijena | Po pakiranje |
|---|---|---|
| 100 - 900 | € 8,51 | € 851,00 |
| 1000+ | € 8,41 | € 841,00 |
Tehnička dokumentacija
Tehnički podaci
Proizvođač
HartingSeries
Han E
Accessory Type
Crimp Contact
Current Rating
16A
Minimum Wire Size mm²
4mm²
Minimum Wire Size (mm²)
4mm²
Maximum Wire Size mm²
4mm²
Gender
Female
Maximum Wire Size (mm²)
4mm²
Termination Method
Crimp
Zemlja podrijetla
Germany
Detalji o proizvodu
Han E® 16A Crimp Series
Harting contact inserts have a wide range of uses. Inserts are selected according to the desired number of poles and voltage and current ratings.
Warning
These connectors should not be mated or unmated under electrical load. Connectors of the same or different types arranged in a line should be polarised to prevent the possibility of a wrong connection.
Approvals
UL, CSA, SEV
Han E® 16A Crimp Series
These Han E® inserts are rated at 16A. They are intended for use with hoods and housings contained within ranges 5, 6, 7, & 8. These hood and housing ranges are associated to a specific Harting 'Size' number identifier. See the 'compatibility' table for details of this relationship, and stock numbers of hoods and housings that are typical of each range.