HARTING Han E Female 16A Crimp Contact Minimum Wire Size 1.5mm² Maximum Wire Size 1.5mm² for use with Heavy Duty Power
Tehnička dokumentacija
Tehnički podaci
Proizvođač
HartingSeries
Han E
Accessory Type
Crimp Contact
For Use With
Heavy Duty Power Connector
Range
Han E GoldTec
Current Rating
16A
Minimum Wire Size mm²
1.5mm²
Gender
Female
Maximum Wire Size mm²
1.5mm²
Termination Method
Crimp
Zemlja podrijetla
Germany
Detalji o proizvodu
Han-Com®, Han D®, Han DD® and Han® E Crimp Contacts
A range of high quality turned crimp contacts for Han-Com®, Han D®, Han DD® and Han® E inserts. The appropriate parallel action crimp to tool is also available for optimum crimp quality, as is the appropriate service crimp tool.
Warning
These connectors should not be mated or unmated under electrical load. Connectors of the same or different types arranged in a line should be polarised to prevent the possibility of wrong connection.
Approvals
UL, CSA, SEV
Han-Com® Signal & Power (Crimp and Screw)
These Han- Com® inserts are available in current ratings from 10A to 100A. They are intended for use typically with hoods and housings; RS stock Nos. 181-0561, 181-0741, 181-0785, 363-8535, 363-8585 and their associated ranges. These hood and housing ranges are associated to a specific Harting 'Size' number identifier
Informacije o stanju skladišta trenutno nisu dostupne.
Provjerite ponovno kasnije.
€ 5,16
komadno (u pakiranju od 50) (bez PDV-a)
€ 6,45
komadno (u pakiranju od 50) (s PDV-om)
50
€ 5,16
komadno (u pakiranju od 50) (bez PDV-a)
€ 6,45
komadno (u pakiranju od 50) (s PDV-om)
50
Tehnička dokumentacija
Tehnički podaci
Proizvođač
HartingSeries
Han E
Accessory Type
Crimp Contact
For Use With
Heavy Duty Power Connector
Range
Han E GoldTec
Current Rating
16A
Minimum Wire Size mm²
1.5mm²
Gender
Female
Maximum Wire Size mm²
1.5mm²
Termination Method
Crimp
Zemlja podrijetla
Germany
Detalji o proizvodu
Han-Com®, Han D®, Han DD® and Han® E Crimp Contacts
A range of high quality turned crimp contacts for Han-Com®, Han D®, Han DD® and Han® E inserts. The appropriate parallel action crimp to tool is also available for optimum crimp quality, as is the appropriate service crimp tool.
Warning
These connectors should not be mated or unmated under electrical load. Connectors of the same or different types arranged in a line should be polarised to prevent the possibility of wrong connection.
Approvals
UL, CSA, SEV
Han-Com® Signal & Power (Crimp and Screw)
These Han- Com® inserts are available in current ratings from 10A to 100A. They are intended for use typically with hoods and housings; RS stock Nos. 181-0561, 181-0741, 181-0785, 363-8535, 363-8585 and their associated ranges. These hood and housing ranges are associated to a specific Harting 'Size' number identifier