HARTING, D-Sub Standard Series, Female Crimp D-sub Connector Contact, PdNi Pin, 24 → 20 AWG
Tehnička dokumentacija
Tehnički podaci
Proizvođač
HartingGender
Female
Contact Material
Brass
Wire Size
24 → 20 AWG
Termination Method
Crimp
Contact Plating
PdNi
Contact Type
Pin
Maximum Contact Resistance
≤10MΩ
Minimum Wire Size mm²
0.25mm²
Maximum Wire Size mm²
0.56mm²
Series
D-Sub Standard
Current Rating
6.5A
Length
14.1mm
Maximum Wire Size AWG
20AWG
Minimum Wire Size AWG
24AWG
Zemlja podrijetla
Germany
Detalji o proizvodu
Harting Sub-D Connector Crimp Contacts and Tooling
From Harting, a range of Male and female contacts for crimping onto wires with cross sections between 28 - 20 AWG, suitable for Harting D-Sub connectors. The range also includes an appropriate crimp tool for use with male and female cut and formed contacts, and an insertion removal tool.
Standards
IEC 60 807
€ 145,00
€ 0,29 Each (On a Reel of 500) (bez PDV-a)
€ 181,25
€ 0,362 Each (On a Reel of 500) (s PDV-om)
500
€ 145,00
€ 0,29 Each (On a Reel of 500) (bez PDV-a)
€ 181,25
€ 0,362 Each (On a Reel of 500) (s PDV-om)
Informacije o stanju skladišta trenutno nisu dostupne.
500
Informacije o stanju skladišta trenutno nisu dostupne.
| količina | jedinična cijena | Po kolut |
|---|---|---|
| 500 - 1000 | € 0,29 | € 145,00 |
| 1500+ | € 0,28 | € 140,00 |
Tehnička dokumentacija
Tehnički podaci
Proizvođač
HartingGender
Female
Contact Material
Brass
Wire Size
24 → 20 AWG
Termination Method
Crimp
Contact Plating
PdNi
Contact Type
Pin
Maximum Contact Resistance
≤10MΩ
Minimum Wire Size mm²
0.25mm²
Maximum Wire Size mm²
0.56mm²
Series
D-Sub Standard
Current Rating
6.5A
Length
14.1mm
Maximum Wire Size AWG
20AWG
Minimum Wire Size AWG
24AWG
Zemlja podrijetla
Germany
Detalji o proizvodu
Harting Sub-D Connector Crimp Contacts and Tooling
From Harting, a range of Male and female contacts for crimping onto wires with cross sections between 28 - 20 AWG, suitable for Harting D-Sub connectors. The range also includes an appropriate crimp tool for use with male and female cut and formed contacts, and an insertion removal tool.
Standards
IEC 60 807