Harting Circular Connector Contact
Tehnička dokumentacija
Tehnički podaci
Proizvođač
HartingFor Use With
Har-Speed M12 Connectors
Contact Type
Signal
Minimum Operating Temperature
-40°C
Maximum Operating Temperature
+85°C
Mounting Type
Cable Mount
Detalji o proizvodu
har-speed M12 accessories
Harting har-speed M12
With har-speed M12 HARTING bases the Ethernet network on a sustainable M12 foundation. The har-speed M12 differs significantly from today's M12 connectors for Ethernet because it is based on a 4-pair connector face with paired shielding. This allows har-speed M12 to be used for Ethernet transfer rates up to 10 Gigabit. The new HARTING har-speed M12 connector is, therefore, capable of complying with the high requirements of the transfer class EA, respectively the Cat. 6A. For the first time an M12 cabling system can be used for relevantly high data performance and permanent sustainability. The har-speed M12 connectors can be optimally used for applications with bandwidths in machine and facility engineering, but also for the IP 67 infrastructure. The basis for the new development is the new PAS 61076-2-10x that defines a uniform connector face for 8-pole M12 connectors.
Informacije o stanju skladišta trenutno nisu dostupne.
Provjerite ponovno kasnije.
€ 2,25
komadno (u pakiranju od 10) (bez PDV-a)
€ 2,812
komadno (u pakiranju od 10) (s PDV-om)
10
€ 2,25
komadno (u pakiranju od 10) (bez PDV-a)
€ 2,812
komadno (u pakiranju od 10) (s PDV-om)
10
Kupujte na veliko
| količina | jedinična cijena | Po pakiranje |
|---|---|---|
| 10 - 10 | € 2,25 | € 22,50 |
| 20+ | € 2,20 | € 22,00 |
Tehnička dokumentacija
Tehnički podaci
Proizvođač
HartingFor Use With
Har-Speed M12 Connectors
Contact Type
Signal
Minimum Operating Temperature
-40°C
Maximum Operating Temperature
+85°C
Mounting Type
Cable Mount
Detalji o proizvodu
har-speed M12 accessories
Harting har-speed M12
With har-speed M12 HARTING bases the Ethernet network on a sustainable M12 foundation. The har-speed M12 differs significantly from today's M12 connectors for Ethernet because it is based on a 4-pair connector face with paired shielding. This allows har-speed M12 to be used for Ethernet transfer rates up to 10 Gigabit. The new HARTING har-speed M12 connector is, therefore, capable of complying with the high requirements of the transfer class EA, respectively the Cat. 6A. For the first time an M12 cabling system can be used for relevantly high data performance and permanent sustainability. The har-speed M12 connectors can be optimally used for applications with bandwidths in machine and facility engineering, but also for the IP 67 infrastructure. The basis for the new development is the new PAS 61076-2-10x that defines a uniform connector face for 8-pole M12 connectors.