Safety Enabling Switch, DPDT, IP65
Tehnička dokumentacija
Tehnički podaci
Proizvođač
IdecContact Configuration
DPDT
Illuminated
No
Contact Configuration
Double Pole Double Throw (DPDT)
Panel Cut Out Size
16 (Dia.)mm
Panel Cut Out Diameter
16mm
IP Rating
IP65
Actuator Colour
Yellow
Voltage Rating
250V ac/dc
Contact Current Rating
500 mA
Actuator Shape
Plunger
Actuator Type
Button
Terminal Type
Solder
Zemlja podrijetla
Japan
Detalji o proizvodu
IDEC HE5B Series Pushbutton Enabling Switch
Ideally suited for use as an enabling switch for manual robotic control. To assist the operator the "On" position requires only light pressure to maintain the function, a higher force is then required to switch from the "On" position to position 3. The contact will not close when released from "Off" position 3 to "Off" position 1. For a suitable IDEC "Pendant Grip" switch housing for HE5B, see RS Stock No. 807-7086. The HE5B series pushbutton enabling switch is the RS Stock No. 807-7112. Rubber boot switch button covers are available in Yellow, RS Stock No. 807-7121, in Black, RS Stock No. 807-7124, in Grey, RS Stock No. 807-7128.
Standards
IEC60947-5-1, EN60947-5-1, JIS C8201-5-1, UL508, CSA C22.2 No 14
Enabling Switch
Informacije o stanju skladišta trenutno nisu dostupne.
Provjerite ponovno kasnije.
€ 76,00
komadno (bez PDV-a)
€ 95,00
komadno (s PDV-om)
1
€ 76,00
komadno (bez PDV-a)
€ 95,00
komadno (s PDV-om)
1
Kupujte na veliko
| količina | jedinična cijena |
|---|---|
| 1 - 4 | € 76,00 |
| 5+ | € 75,00 |
Tehnička dokumentacija
Tehnički podaci
Proizvođač
IdecContact Configuration
DPDT
Illuminated
No
Contact Configuration
Double Pole Double Throw (DPDT)
Panel Cut Out Size
16 (Dia.)mm
Panel Cut Out Diameter
16mm
IP Rating
IP65
Actuator Colour
Yellow
Voltage Rating
250V ac/dc
Contact Current Rating
500 mA
Actuator Shape
Plunger
Actuator Type
Button
Terminal Type
Solder
Zemlja podrijetla
Japan
Detalji o proizvodu
IDEC HE5B Series Pushbutton Enabling Switch
Ideally suited for use as an enabling switch for manual robotic control. To assist the operator the "On" position requires only light pressure to maintain the function, a higher force is then required to switch from the "On" position to position 3. The contact will not close when released from "Off" position 3 to "Off" position 1. For a suitable IDEC "Pendant Grip" switch housing for HE5B, see RS Stock No. 807-7086. The HE5B series pushbutton enabling switch is the RS Stock No. 807-7112. Rubber boot switch button covers are available in Yellow, RS Stock No. 807-7121, in Black, RS Stock No. 807-7124, in Grey, RS Stock No. 807-7128.
Standards
IEC60947-5-1, EN60947-5-1, JIS C8201-5-1, UL508, CSA C22.2 No 14