Legris Nickel Plated Brass 2 Way, Ball Valve, BSPP 1/2in, 40bar Operating Pressure
Tehnička dokumentacija
Tehnički podaci
Proizvođač
LegrisType
2 Way
Ball Material
Polished Brass
Attachment Type
Threaded
Thread Standard
BSPP
Thread Size
1/2in
Body Material
Nickel Plated Brass
Safe for Use With
Water
Handle Type
Lever
Maximum Working Pressure psi
580psi
Operating Pressure
40bar
Handle Colour
Red
Maximum Working Pressure bar
40bar
Zemlja podrijetla
France
Detalji o proizvodu
In-Line Double Female Vented Lockable Ball Valve
The standard Legris ball valve provides a reliable means of opening and closing fluid systems. It requires a simple 180° turn for the three way version
Ball Valve, Standard, Padlockable and Panel Mount
These nickel plated brass ball valves have seals designed to remove scale deposits with each operation. The polished brass ball is sealed on both sides by nylon ring seals that are supported by compensating nitrile ’O’ rings. This arrangement keeps the seal in contact with the ball, preventing leakage should seal wear occur. A single threaded insert forms part of the valve body, maintaining the required seal compression and allowing the valve to be disassembled easily for inspection.
Informacije o stanju skladišta trenutno nisu dostupne.
Provjerite ponovno kasnije.
€ 328,00
1 kutija od 2 (bez PDV-a)
€ 410,00
1 kutija od 2 (s PDV-om)
1
€ 328,00
1 kutija od 2 (bez PDV-a)
€ 410,00
1 kutija od 2 (s PDV-om)
1
Kupujte na veliko
| količina | jedinična cijena |
|---|---|
| 1 - 4 | € 328,00 |
| 5+ | € 323,00 |
Tehnička dokumentacija
Tehnički podaci
Proizvođač
LegrisType
2 Way
Ball Material
Polished Brass
Attachment Type
Threaded
Thread Standard
BSPP
Thread Size
1/2in
Body Material
Nickel Plated Brass
Safe for Use With
Water
Handle Type
Lever
Maximum Working Pressure psi
580psi
Operating Pressure
40bar
Handle Colour
Red
Maximum Working Pressure bar
40bar
Zemlja podrijetla
France
Detalji o proizvodu
In-Line Double Female Vented Lockable Ball Valve
The standard Legris ball valve provides a reliable means of opening and closing fluid systems. It requires a simple 180° turn for the three way version
Ball Valve, Standard, Padlockable and Panel Mount
These nickel plated brass ball valves have seals designed to remove scale deposits with each operation. The polished brass ball is sealed on both sides by nylon ring seals that are supported by compensating nitrile ’O’ rings. This arrangement keeps the seal in contact with the ball, preventing leakage should seal wear occur. A single threaded insert forms part of the valve body, maintaining the required seal compression and allowing the valve to be disassembled easily for inspection.