Tehnička dokumentacija
Tehnički podaci
Proizvođač
LumbergSeries
Minimodul
Pitch
2.5mm
Number Of Contacts
11
Number Of Rows
1
Body Orientation
Straight
Shrouded/Unshrouded
Shrouded
Mounting Type
Through Hole
Connector System
Wire to Board
Termination Method
Solder
Contact Plating
Tin
Contact Material
Brass
Current Rating
5.0A
Voltage Rating
160.0 V
Detalji o proizvodu
Minimodul Vertical Locking Headers
These Lumberg Minimodul™ vertical locking pin headers mate with crimp contact housings (3114 Series), see stock number 737-8482 typical, for indirect mating of wire to board connections.
2.5mm Wire to Board - Lumberg Minimodul Series
These Lumberg Minimodul Connectors are for cable-to-board connections. The Minimodul Series connectors provide easy harnessing of single leads and flat cables with established crimp technology and are especially suitable for low and middle-volume production. The design of the Minimodul Series connectors is suitable for signal and low load currents up to 5 A. Pitch 2.50 mm (.098").
Informacije o stanju skladišta trenutno nisu dostupne.
Provjerite ponovno kasnije.
€ 0,74
komadno (u pakiranju od 10) (bez PDV-a)
€ 0,925
komadno (u pakiranju od 10) (s PDV-om)
10
€ 0,74
komadno (u pakiranju od 10) (bez PDV-a)
€ 0,925
komadno (u pakiranju od 10) (s PDV-om)
10
Kupujte na veliko
količina | jedinična cijena | Po pakiranje |
---|---|---|
10 - 190 | € 0,74 | € 7,40 |
200+ | € 0,72 | € 7,20 |
Tehnička dokumentacija
Tehnički podaci
Proizvođač
LumbergSeries
Minimodul
Pitch
2.5mm
Number Of Contacts
11
Number Of Rows
1
Body Orientation
Straight
Shrouded/Unshrouded
Shrouded
Mounting Type
Through Hole
Connector System
Wire to Board
Termination Method
Solder
Contact Plating
Tin
Contact Material
Brass
Current Rating
5.0A
Voltage Rating
160.0 V
Detalji o proizvodu
Minimodul Vertical Locking Headers
These Lumberg Minimodul™ vertical locking pin headers mate with crimp contact housings (3114 Series), see stock number 737-8482 typical, for indirect mating of wire to board connections.
2.5mm Wire to Board - Lumberg Minimodul Series
These Lumberg Minimodul Connectors are for cable-to-board connections. The Minimodul Series connectors provide easy harnessing of single leads and flat cables with established crimp technology and are especially suitable for low and middle-volume production. The design of the Minimodul Series connectors is suitable for signal and low load currents up to 5 A. Pitch 2.50 mm (.098").