Tehnička dokumentacija
Tehnički podaci
Proizvođač
Maxim IntegratedAmplifier Type
High Speed
Mounting Type
Surface Mount
Package Type
SOIC
Power Supply Type
Dual, Single
Number of Channels per Chip
1
Pin Count
8
Typical Single Supply Voltage
4.8 → 10 V
Typical Gain Bandwidth Product
28MHz
Typical Dual Supply Voltage
±2.4 to ±5.25V
Typical Slew Rate
4.5V/µs
Minimum Operating Temperature
-40 °C
Maximum Operating Temperature
+85 °C
Typical Voltage Gain
118 dB
Rail to Rail
No
Height
1.5mm
Width
4mm
Length
5mm
Dimensions
5 x 4 x 1.5mm
Typical Input Voltage Noise Density
1.5nV/√Hz
Detalji o proizvodu
High-Voltage Operational Amplifiers, Maxim Integrated
High-voltage operational amplifiers are specified in applications where an input signal is greater than 10 V or ±5 V and an accurate output is required.
Operational Amplifiers, Maxim Integrated
€ 115,00
€ 11,50 Each (Supplied in a Tube) (bez PDV-a)
€ 143,75
€ 14,375 Each (Supplied in a Tube) (s PDV-om)
Proizvodno pakiranje (cijev)
10
€ 115,00
€ 11,50 Each (Supplied in a Tube) (bez PDV-a)
€ 143,75
€ 14,375 Each (Supplied in a Tube) (s PDV-om)
Informacije o stanju skladišta trenutno nisu dostupne.
Proizvodno pakiranje (cijev)
10
Informacije o stanju skladišta trenutno nisu dostupne.
| količina | jedinična cijena | Po cijev |
|---|---|---|
| 10 - 98 | € 11,50 | € 23,00 |
| 100+ | € 11,00 | € 22,00 |
Tehnička dokumentacija
Tehnički podaci
Proizvođač
Maxim IntegratedAmplifier Type
High Speed
Mounting Type
Surface Mount
Package Type
SOIC
Power Supply Type
Dual, Single
Number of Channels per Chip
1
Pin Count
8
Typical Single Supply Voltage
4.8 → 10 V
Typical Gain Bandwidth Product
28MHz
Typical Dual Supply Voltage
±2.4 to ±5.25V
Typical Slew Rate
4.5V/µs
Minimum Operating Temperature
-40 °C
Maximum Operating Temperature
+85 °C
Typical Voltage Gain
118 dB
Rail to Rail
No
Height
1.5mm
Width
4mm
Length
5mm
Dimensions
5 x 4 x 1.5mm
Typical Input Voltage Noise Density
1.5nV/√Hz
Detalji o proizvodu
High-Voltage Operational Amplifiers, Maxim Integrated
High-voltage operational amplifiers are specified in applications where an input signal is greater than 10 V or ±5 V and an accurate output is required.


