Microchip Trace Connector Connector ATAVR-MICTOR38
Tehnička dokumentacija
Tehnički podaci
Detalji o proizvodu
Mictor 38 Trace Connector
The Mictor 38 trace connector is ideal for connecting the AVR ONE! probe connector to your Atmel development board. The connector is used primarily for the high-speed trace capture of up to 16-bits of trace data and status/sync signals but can also be used to connect to debug signals.
Note: The through-hole pins on the central earthing strip should be soldered directly to the ground plane of your development board.
Informacije o stanju skladišta trenutno nisu dostupne.
Provjerite ponovno kasnije.
€ 32,00
komadno (bez PDV-a)
€ 40,00
komadno (s PDV-om)
1
€ 32,00
komadno (bez PDV-a)
€ 40,00
komadno (s PDV-om)
1
Tehnička dokumentacija
Tehnički podaci
Detalji o proizvodu
Mictor 38 Trace Connector
The Mictor 38 trace connector is ideal for connecting the AVR ONE! probe connector to your Atmel development board. The connector is used primarily for the high-speed trace capture of up to 16-bits of trace data and status/sync signals but can also be used to connect to debug signals.
Note: The through-hole pins on the central earthing strip should be soldered directly to the ground plane of your development board.