Microchip ATSTK600-RC05 Routing Card for use with 40 Pin megaAVR
Tehnička dokumentacija
Tehnički podaci
Proizvođač
MicrochipProduct Type
Development Kit Accessory
Accessory Type
Routing Card
For Use With
40 Pin megaAVR
Standards/Approvals
No
Detalji o proizvodu
STK600 Starter Kit Routing Cards
The STK600 starter kit from Atmel has a sandwich design to match a specific part package and pin out to the generic pin headers. It also features an expansion area where most part pins are available. While the variety of IC packages is relatively limited, the number of possible pin outs increases rapidly with the number of pins. i.e. a 6-pin IC can have 720 (6!) different pin outs! The routing / socket card design provides a low cost solution to support upcoming devices as the socket is the cost driving factor. The routing cards sit between the generic socket card and the STK600. It has one pair of electric pads underneath to mate with the STK600 spring loaded connector, and one pair of pads on top where the socket card connector connects. A part specific card with the target IC soldered on can be viewed as a routing card without the top pads.
Informacije o stanju skladišta trenutno nisu dostupne.
Cijena na upit
1
Cijena na upit
Informacije o stanju skladišta trenutno nisu dostupne.
1
Tehnička dokumentacija
Tehnički podaci
Proizvođač
MicrochipProduct Type
Development Kit Accessory
Accessory Type
Routing Card
For Use With
40 Pin megaAVR
Standards/Approvals
No
Detalji o proizvodu
STK600 Starter Kit Routing Cards
The STK600 starter kit from Atmel has a sandwich design to match a specific part package and pin out to the generic pin headers. It also features an expansion area where most part pins are available. While the variety of IC packages is relatively limited, the number of possible pin outs increases rapidly with the number of pins. i.e. a 6-pin IC can have 720 (6!) different pin outs! The routing / socket card design provides a low cost solution to support upcoming devices as the socket is the cost driving factor. The routing cards sit between the generic socket card and the STK600. It has one pair of electric pads underneath to mate with the STK600 spring loaded connector, and one pair of pads on top where the socket card connector connects. A part specific card with the target IC soldered on can be viewed as a routing card without the top pads.