dsPIC33EV256GM102-I/SS Microchip dsPIC33EV, 16bit Digital Signal Processor 60MHz 256 kB Flash 28-Pin SSOP
Tehnička dokumentacija
Tehnički podaci
Number of USART Channels
0
Number of PCI Channels
0
Number of Ethernet Channels
0
Number of LIN Channels
0
Number of I2C Channels
1
Number of CAN Channels
1
Number of ADC Units
1
Number of PWM Units
1
Number of SPI Channels
2
Number of UART Channels
2
PWM Channels
6
Numeric and Arithmetic Format
MAC
Data Bus Width
16bit
Number of Timers
9
PWM Resolution
16bit
Device Million Instructions per Second
70MIPS
ADC Channels
11
Program Memory Type
Flash
Model Number
1492-GS3G200-H1
Minimum Operating Temperature
-40 °C
Accessory Type
Blank round label
Maximum Operating Temperature
+85 °C
Instruction Set Architecture
Modified Harvard
Mounting Type
Surface Mount
Pin Count
28
RAM Size
16 kB
Maximum Frequency
60MHz
Program Memory Size
256 kB
Height
1.85mm
Timers
2 x 32 bit, 5 x 16 bit
Width
5.6mm
Pulse Width Modulation
1 (6 x 16 bit)
Series
dsPIC33EV
Length
10.5mm
Typical Operating Supply Voltage
5 V
ADCs
1 (11 x 10/12 bit)
Package Type
SSOP
Brand
MicrochipDimensions
10.5 x 5.6 x 1.85mm
Detalji o proizvodu
Molex SlimRay™ Pre-Wired LED Array Holders for Cree CXA13 Arrays
The SlimRay™ Chip-On-Board (COB) Array Holder from Molex is designed to hold the Cree CXA13 LED array. The COB is supplied with power through Gold plated compression contacts in the SlimRay™ Array Holder which are pre-wired by Molex by an insert-moulded attachment which provides a retention force greater than 50 N for a simple solderless assembly. The design of the SlimRay™ COB Array Holder includes an integrated pre-hold tab to secure the array before mounting for ease of installation. The robust housing of the SlimRay™ COB Array Holder has a height of 3.15 mm and standard metric screw size countersunk mounting holes (Ø2.6 mm).
Zamisliti. Stvoriti. Surađivati
PRIDRUŽITE SE BESPLATNO
Bez skrivenih naknada!
- Preuzmite i koristite naš softver DesignSpark za svoje PCB i 3D mehaničke dizajne
- Pregledajte i doprinesite sadržaju internet stranice i foruma
- Preuzmite 3D modele, sheme i otiske s više od milijun proizvoda
Informacije o stanju skladišta trenutno nisu dostupne.
Provjerite ponovno kasnije.
€ 6,50
Each (In a Pack of 2) (bez PDV-a)
€ 7,605
Each (In a Pack of 2) (s PDV-om)
Standard
2
€ 6,50
Each (In a Pack of 2) (bez PDV-a)
€ 7,605
Each (In a Pack of 2) (s PDV-om)
Standard
2
Kupujte na veliko
| količina | Jedinična cijena | Po pakovanje |
|---|---|---|
| 2 - 8 | € 6,50 | € 13,00 |
| 10 - 22 | € 6,15 | € 12,30 |
| 24+ | € 6,00 | € 12,00 |
Zamisliti. Stvoriti. Surađivati
PRIDRUŽITE SE BESPLATNO
Bez skrivenih naknada!
- Preuzmite i koristite naš softver DesignSpark za svoje PCB i 3D mehaničke dizajne
- Pregledajte i doprinesite sadržaju internet stranice i foruma
- Preuzmite 3D modele, sheme i otiske s više od milijun proizvoda
Tehnička dokumentacija
Tehnički podaci
Number of USART Channels
0
Number of PCI Channels
0
Number of Ethernet Channels
0
Number of LIN Channels
0
Number of I2C Channels
1
Number of CAN Channels
1
Number of ADC Units
1
Number of PWM Units
1
Number of SPI Channels
2
Number of UART Channels
2
PWM Channels
6
Numeric and Arithmetic Format
MAC
Data Bus Width
16bit
Number of Timers
9
PWM Resolution
16bit
Device Million Instructions per Second
70MIPS
ADC Channels
11
Program Memory Type
Flash
Model Number
1492-GS3G200-H1
Minimum Operating Temperature
-40 °C
Accessory Type
Blank round label
Maximum Operating Temperature
+85 °C
Instruction Set Architecture
Modified Harvard
Mounting Type
Surface Mount
Pin Count
28
RAM Size
16 kB
Maximum Frequency
60MHz
Program Memory Size
256 kB
Height
1.85mm
Timers
2 x 32 bit, 5 x 16 bit
Width
5.6mm
Pulse Width Modulation
1 (6 x 16 bit)
Series
dsPIC33EV
Length
10.5mm
Typical Operating Supply Voltage
5 V
ADCs
1 (11 x 10/12 bit)
Package Type
SSOP
Brand
MicrochipDimensions
10.5 x 5.6 x 1.85mm
Detalji o proizvodu
Molex SlimRay™ Pre-Wired LED Array Holders for Cree CXA13 Arrays
The SlimRay™ Chip-On-Board (COB) Array Holder from Molex is designed to hold the Cree CXA13 LED array. The COB is supplied with power through Gold plated compression contacts in the SlimRay™ Array Holder which are pre-wired by Molex by an insert-moulded attachment which provides a retention force greater than 50 N for a simple solderless assembly. The design of the SlimRay™ COB Array Holder includes an integrated pre-hold tab to secure the array before mounting for ease of installation. The robust housing of the SlimRay™ COB Array Holder has a height of 3.15 mm and standard metric screw size countersunk mounting holes (Ø2.6 mm).
Zamisliti. Stvoriti. Surađivati
PRIDRUŽITE SE BESPLATNO
Bez skrivenih naknada!
- Preuzmite i koristite naš softver DesignSpark za svoje PCB i 3D mehaničke dizajne
- Pregledajte i doprinesite sadržaju internet stranice i foruma
- Preuzmite 3D modele, sheme i otiske s više od milijun proizvoda