Microchip 5 PWM Controller, 3 MHz 13.5 V 16-Pin, PDIP

RS kataloški broj:: 178-4853robna marka: MicrochipProizvođački broj:: HV9120P-G
brand-logo
Prikaži sve u PWM

Tehnička dokumentacija

Tehnički podaci

Proizvođač

Microchip

Product Type

PWM Controller

Maximum Switching Frequency

3MHz

Supply Current

1.3mA

Output Voltage

4.16 V

Zero Power Detection

No

Output Current

10mA

Number of Outputs

5

Mount Type

Through Hole

Minimum Supply Voltage

9V

Package Type

PDIP

Maximum Supply Voltage

13.5V

Pin Count

16

Maximum Duty Cycle

49.6%

Minimum Operating Temperature

-55°C

Maximum Operating Temperature

125°C

PWM Controller Type

Current Mode

Width

177.8 mm

Height

4.95mm

Length

20.57mm

Standards/Approvals

No

Series

HV91

Automotive Standard

No

Detalji o proizvodu

HV912x Series High-Voltage Current-Mode PWM Controllers

The Microchip HV912x range of high-voltage current-mode PWM controllers are Switch Mode Power Supply (SMPS) controller subsystems that can start and run directly from almost any DC input such as 12V batteries and a rectified and filtered 240VAC line.

These devices can self-start directly from a high voltage input and subsequently take the power to operate from one of the outputs of the converter it is controlling, allowing very efficient operation while maintaining input-to-output galvanic isolation limited in voltage only by the insulation system of the associated magnetic assembly. A ±2% internal bandgap reference, internal operational amplifier, very high speed comparator, and output buffer allow production of rugged, high performance, high efficiency power supplies of 50W or more, which can still be over 80% efficient at outputs of 1.0W or less. Remote on/off controls allow either latching or nonlatching remote shutdown. During shutdown, the power required is under 6.0mW.

PWM (Pulse Width Modulation) Controllers, Microchip

Zamisliti. Stvoriti. Surađivati

PRIDRUŽITE SE BESPLATNO

Bez skrivenih naknada!

design-spark
design-spark
  • Preuzmite i koristite naš softver DesignSpark za svoje PCB i 3D mehaničke dizajne
  • Pregledajte i doprinesite sadržaju internet stranice i foruma
  • Preuzmite 3D modele, sheme i otiske s više od milijun proizvoda
Kliknite ovdje kako biste saznali više
Prikaži sve u PWM

Informacije o stanju skladišta trenutno nisu dostupne.

€ 47,04

€ 1,96 komadno (u cijevi od 24) (bez PDV-a)

€ 58,80

€ 2,45 komadno (u cijevi od 24) (s PDV-om)

Microchip 5 PWM Controller, 3 MHz 13.5 V 16-Pin, PDIP

€ 47,04

€ 1,96 komadno (u cijevi od 24) (bez PDV-a)

€ 58,80

€ 2,45 komadno (u cijevi od 24) (s PDV-om)

Microchip 5 PWM Controller, 3 MHz 13.5 V 16-Pin, PDIP

Informacije o stanju skladišta trenutno nisu dostupne.

Zamisliti. Stvoriti. Surađivati

PRIDRUŽITE SE BESPLATNO

Bez skrivenih naknada!

design-spark
design-spark
  • Preuzmite i koristite naš softver DesignSpark za svoje PCB i 3D mehaničke dizajne
  • Pregledajte i doprinesite sadržaju internet stranice i foruma
  • Preuzmite 3D modele, sheme i otiske s više od milijun proizvoda
Kliknite ovdje kako biste saznali više

Tehnička dokumentacija

Tehnički podaci

Proizvođač

Microchip

Product Type

PWM Controller

Maximum Switching Frequency

3MHz

Supply Current

1.3mA

Output Voltage

4.16 V

Zero Power Detection

No

Output Current

10mA

Number of Outputs

5

Mount Type

Through Hole

Minimum Supply Voltage

9V

Package Type

PDIP

Maximum Supply Voltage

13.5V

Pin Count

16

Maximum Duty Cycle

49.6%

Minimum Operating Temperature

-55°C

Maximum Operating Temperature

125°C

PWM Controller Type

Current Mode

Width

177.8 mm

Height

4.95mm

Length

20.57mm

Standards/Approvals

No

Series

HV91

Automotive Standard

No

Detalji o proizvodu

HV912x Series High-Voltage Current-Mode PWM Controllers

The Microchip HV912x range of high-voltage current-mode PWM controllers are Switch Mode Power Supply (SMPS) controller subsystems that can start and run directly from almost any DC input such as 12V batteries and a rectified and filtered 240VAC line.

These devices can self-start directly from a high voltage input and subsequently take the power to operate from one of the outputs of the converter it is controlling, allowing very efficient operation while maintaining input-to-output galvanic isolation limited in voltage only by the insulation system of the associated magnetic assembly. A ±2% internal bandgap reference, internal operational amplifier, very high speed comparator, and output buffer allow production of rugged, high performance, high efficiency power supplies of 50W or more, which can still be over 80% efficient at outputs of 1.0W or less. Remote on/off controls allow either latching or nonlatching remote shutdown. During shutdown, the power required is under 6.0mW.

PWM (Pulse Width Modulation) Controllers, Microchip

Zamisliti. Stvoriti. Surađivati

PRIDRUŽITE SE BESPLATNO

Bez skrivenih naknada!

design-spark
design-spark
  • Preuzmite i koristite naš softver DesignSpark za svoje PCB i 3D mehaničke dizajne
  • Pregledajte i doprinesite sadržaju internet stranice i foruma
  • Preuzmite 3D modele, sheme i otiske s više od milijun proizvoda
Kliknite ovdje kako biste saznali više