Microchip LAN9252I/PT, Ethernet Controller, 3.3 V 100 Mbps Host Bus, 64-Pin 3.3 V TQFP
Tehnička dokumentacija
Tehnički podaci
Proizvođač
MicrochipMaximum Data Rate
100Mbps
Product Type
Ethernet Controller
Communication Mode
Full Duplex/Half Duplex
Loopback Mode
Internal
Interface Type
Host Bus
Standard Supported
IEEE 802.3, ANSI X3.263, IEEE 802.3u
Mount Type
Surface
Package Type
TQFP
Maximum Supply Voltage
3.3V
Pin Count
64
Minimum Operating Temperature
85°C
Maximum Operating Temperature
-40°C
Minimum Supply Voltage
3.3V
Width
10 mm
Height
1.2mm
Length
10mm
Standards/Approvals
No
Automotive Standard
No
Detalji o proizvodu
LAN9252 EtherCAT® Slave Controllers
The LAN9252 device from Microchip is a 2/3 port EtherCAT® slave controller with dual integrated Ethernet PHYs, each of which contain a full-duplex 100BASE-TX transceiver. The LAN9252 supports HP Auto MDI-X that allows the use of direct connect or cross-over LAN cables. 100BASE-FX is supported via an external fiber transceiver. Included is a 3 port EtherCAT® slave controller with 4K bytes of Dual Port memory (DPRAM), 4 SyncManagers, 3 Fieldbus Memory Management Units (FMMUs) and a 64-bit Distributed Clock. The LAN9252 supports 4 Process Data Interfaces - SPI/SQI, HBI and a 16 Bit Digital IO.
Ethernet Communications - Microchip
Zamisliti. Stvoriti. Surađivati
PRIDRUŽITE SE BESPLATNO
Bez skrivenih naknada!
- Preuzmite i koristite naš softver DesignSpark za svoje PCB i 3D mehaničke dizajne
- Pregledajte i doprinesite sadržaju internet stranice i foruma
- Preuzmite 3D modele, sheme i otiske s više od milijun proizvoda
Informacije o stanju skladišta trenutno nisu dostupne.
€ 14,20
€ 14,20 komadno (bez PDV-a)
€ 17,75
€ 17,75 komadno (s PDV-om)
Standard
1
€ 14,20
€ 14,20 komadno (bez PDV-a)
€ 17,75
€ 17,75 komadno (s PDV-om)
Informacije o stanju skladišta trenutno nisu dostupne.
Standard
1
Zamisliti. Stvoriti. Surađivati
PRIDRUŽITE SE BESPLATNO
Bez skrivenih naknada!
- Preuzmite i koristite naš softver DesignSpark za svoje PCB i 3D mehaničke dizajne
- Pregledajte i doprinesite sadržaju internet stranice i foruma
- Preuzmite 3D modele, sheme i otiske s više od milijun proizvoda
Tehnička dokumentacija
Tehnički podaci
Proizvođač
MicrochipMaximum Data Rate
100Mbps
Product Type
Ethernet Controller
Communication Mode
Full Duplex/Half Duplex
Loopback Mode
Internal
Interface Type
Host Bus
Standard Supported
IEEE 802.3, ANSI X3.263, IEEE 802.3u
Mount Type
Surface
Package Type
TQFP
Maximum Supply Voltage
3.3V
Pin Count
64
Minimum Operating Temperature
85°C
Maximum Operating Temperature
-40°C
Minimum Supply Voltage
3.3V
Width
10 mm
Height
1.2mm
Length
10mm
Standards/Approvals
No
Automotive Standard
No
Detalji o proizvodu
LAN9252 EtherCAT® Slave Controllers
The LAN9252 device from Microchip is a 2/3 port EtherCAT® slave controller with dual integrated Ethernet PHYs, each of which contain a full-duplex 100BASE-TX transceiver. The LAN9252 supports HP Auto MDI-X that allows the use of direct connect or cross-over LAN cables. 100BASE-FX is supported via an external fiber transceiver. Included is a 3 port EtherCAT® slave controller with 4K bytes of Dual Port memory (DPRAM), 4 SyncManagers, 3 Fieldbus Memory Management Units (FMMUs) and a 64-bit Distributed Clock. The LAN9252 supports 4 Process Data Interfaces - SPI/SQI, HBI and a 16 Bit Digital IO.
Ethernet Communications - Microchip
Zamisliti. Stvoriti. Surađivati
PRIDRUŽITE SE BESPLATNO
Bez skrivenih naknada!
- Preuzmite i koristite naš softver DesignSpark za svoje PCB i 3D mehaničke dizajne
- Pregledajte i doprinesite sadržaju internet stranice i foruma
- Preuzmite 3D modele, sheme i otiske s više od milijun proizvoda