Tehnička dokumentacija
Tehnički podaci
Proizvođač
MicrochipNumber of Supervisors
1
Output Driver
Active Low, Open Drain
Mounting Type
Surface Mount
Maximum Reset Active Time
700ms
Package Type
SOT-23
Pin Count
3
Dimensions
2.9 x 1.3 x 0.95mm
Maximum Monitored Voltage
3V
Maximum Operating Supply Voltage
5.5 V
Maximum Operating Temperature
+85 °C
Minimum Operating Supply Voltage
1 V
Minimum Operating Temperature
-40 °C
Minimum Monitored Voltage
2.92V
Zemlja podrijetla
Thailand
Detalji o proizvodu
MCP130 Microcontroller Supervisory and Reset Circuit
The Microchip MCP130 is a Voltage Supervisor that holds a Microcontroller or other device in Reset during under-voltage conditions. During Start-Up and Brownout events the MCP130 asserts a Reset signal via an active-low Reset Pin. Integrated into the MCP130 is an internal 5 kΩ Pull-Up Resistor.
Supervisory & Reset Circuits - Microchip
Informacije o stanju skladišta trenutno nisu dostupne.
Provjerite ponovno kasnije.
€ 0,85
komadno (u pakiranju od 10) (bez PDV-a)
€ 1,062
komadno (u pakiranju od 10) (s PDV-om)
10
€ 0,85
komadno (u pakiranju od 10) (bez PDV-a)
€ 1,062
komadno (u pakiranju od 10) (s PDV-om)
10
Kupujte na veliko
količina | jedinična cijena | Po pakiranje |
---|---|---|
10 - 20 | € 0,85 | € 8,50 |
30 - 90 | € 0,80 | € 8,00 |
100+ | € 0,79 | € 7,90 |
Tehnička dokumentacija
Tehnički podaci
Proizvođač
MicrochipNumber of Supervisors
1
Output Driver
Active Low, Open Drain
Mounting Type
Surface Mount
Maximum Reset Active Time
700ms
Package Type
SOT-23
Pin Count
3
Dimensions
2.9 x 1.3 x 0.95mm
Maximum Monitored Voltage
3V
Maximum Operating Supply Voltage
5.5 V
Maximum Operating Temperature
+85 °C
Minimum Operating Supply Voltage
1 V
Minimum Operating Temperature
-40 °C
Minimum Monitored Voltage
2.92V
Zemlja podrijetla
Thailand
Detalji o proizvodu
MCP130 Microcontroller Supervisory and Reset Circuit
The Microchip MCP130 is a Voltage Supervisor that holds a Microcontroller or other device in Reset during under-voltage conditions. During Start-Up and Brownout events the MCP130 asserts a Reset signal via an active-low Reset Pin. Integrated into the MCP130 is an internal 5 kΩ Pull-Up Resistor.