Tehnička dokumentacija
Tehnički podaci
Proizvođač
MolexSeries
MICRO-FIT 3.0
Pitch
3.0mm
Number Of Contacts
8
Number Of Rows
2
Body Orientation
Right Angle
Shrouded/Unshrouded
Shrouded
Connector System
Wire to Board
Mounting Type
Through Hole
Termination Method
Solder
Contact Plating
Gold
Contact Material
Brass
Current Rating
5.0A
Series Number
43045
Voltage Rating
250.0 V
Detalji o proizvodu
Molex Micro-Fit 3.0 3.0mm Dual Row PCB Headers with Snap in Plastic Peg PCB Lock, 43045 Series
Micro-Fit 3.0 3mm pitch wire to board dual row PCB headers which form part of a compact power connector system providing a low to mid-range power distribution solution. With the ability to carry up to 5A of current, Micro-Fit 3.0 connectors have one of the highest current carrying abilities in the smallest footprints available. These Micro-Fit 3.0 PCB headers incorporate positive latching in the form of a locking ramp on the housing for secure mating and to prevent accidental disconnection. The housings are made of high-temperature UL 94V-0 Liquid Crystal Polymer that can withstand temperatures of up to 265°C during the IR reflow soldering process. The through hole mounting versions of these Micro-Fit 3.0 headers are also SMT compatible which means a reduction in process requirements and costs. To secure these Micro-Fit 3.0 headers to the PCB board, snap-in plastic peg PCB locks are incorporated into the connector design. The contacts of these Micro-Fit 3.0 headers are fully isolated within the housings to reduce arcing. Tin or a choice of two thicknesses of gold contact platings are available to keep down costs
Molex Micro-Fit 3.0 Series
Informacije o stanju skladišta trenutno nisu dostupne.
Provjerite ponovno kasnije.
€ 4,70
komadno (u pakiranju od 5) (bez PDV-a)
€ 5,875
komadno (u pakiranju od 5) (s PDV-om)
Standard
5
€ 4,70
komadno (u pakiranju od 5) (bez PDV-a)
€ 5,875
komadno (u pakiranju od 5) (s PDV-om)
Standard
5
Kupujte na veliko
količina | jedinična cijena | Po pakiranje |
---|---|---|
5 - 95 | € 4,70 | € 23,50 |
100 - 370 | € 3,80 | € 19,00 |
375 - 1495 | € 3,50 | € 17,50 |
1500 - 2995 | € 3,00 | € 15,00 |
3000+ | € 2,90 | € 14,50 |
Tehnička dokumentacija
Tehnički podaci
Proizvođač
MolexSeries
MICRO-FIT 3.0
Pitch
3.0mm
Number Of Contacts
8
Number Of Rows
2
Body Orientation
Right Angle
Shrouded/Unshrouded
Shrouded
Connector System
Wire to Board
Mounting Type
Through Hole
Termination Method
Solder
Contact Plating
Gold
Contact Material
Brass
Current Rating
5.0A
Series Number
43045
Voltage Rating
250.0 V
Detalji o proizvodu
Molex Micro-Fit 3.0 3.0mm Dual Row PCB Headers with Snap in Plastic Peg PCB Lock, 43045 Series
Micro-Fit 3.0 3mm pitch wire to board dual row PCB headers which form part of a compact power connector system providing a low to mid-range power distribution solution. With the ability to carry up to 5A of current, Micro-Fit 3.0 connectors have one of the highest current carrying abilities in the smallest footprints available. These Micro-Fit 3.0 PCB headers incorporate positive latching in the form of a locking ramp on the housing for secure mating and to prevent accidental disconnection. The housings are made of high-temperature UL 94V-0 Liquid Crystal Polymer that can withstand temperatures of up to 265°C during the IR reflow soldering process. The through hole mounting versions of these Micro-Fit 3.0 headers are also SMT compatible which means a reduction in process requirements and costs. To secure these Micro-Fit 3.0 headers to the PCB board, snap-in plastic peg PCB locks are incorporated into the connector design. The contacts of these Micro-Fit 3.0 headers are fully isolated within the housings to reduce arcing. Tin or a choice of two thicknesses of gold contact platings are available to keep down costs