Phoenix Contact MKDSN 2.5/ 2-5.08 HT BK Series PCB Terminal Block, 2-Contact, 5.08mm Pitch, Through Hole Mount, 1-Row,
Tehnička dokumentacija
Tehnički podaci
Proizvođač
Phoenix ContactNumber Of Contacts
2
Pitch
5.08mm
Number Of Rows
1
Mounting Type
Through Hole
Termination Method
Screw
Type
Non Fused Terminal Block
Current Rating
16A
Boja
Black
Voltage Rating
320 V
Series
MKDSN 2.5/ 2-5.08 HT BK
Length
9.5mm
Material
PA (Insulate)
Depth
15mm
Width
10.16mm
Zemlja podrijetla
France
Detalji o proizvodu
Phoenix Contact COMBICON MKDS 5.08mm High Temperature PCB Terminal Blocks
High temperature PCB terminal blocks are reflow solder tolerable and enable a greater proportion of a PCB to be populated and reflow soldered in one operation. Recommended as being suitable for temperature profiles based on EN 61 760-01. When used in reflow oven it is recommended that these components are heat treated at +125°C for 48 hours prior to use.
€ 6,95
€ 1,39 komadno (u pakiranju od 5) (bez PDV-a)
€ 8,69
€ 1,738 komadno (u pakiranju od 5) (s PDV-om)
5
€ 6,95
€ 1,39 komadno (u pakiranju od 5) (bez PDV-a)
€ 8,69
€ 1,738 komadno (u pakiranju od 5) (s PDV-om)
Informacije o stanju skladišta trenutno nisu dostupne.
5
Informacije o stanju skladišta trenutno nisu dostupne.
| količina | jedinična cijena | Po pakiranje |
|---|---|---|
| 5 - 120 | € 1,39 | € 6,95 |
| 125 - 370 | € 1,21 | € 6,05 |
| 375 - 995 | € 1,13 | € 5,65 |
| 1000 - 1995 | € 1,09 | € 5,45 |
| 2000+ | € 1,08 | € 5,40 |
Tehnička dokumentacija
Tehnički podaci
Proizvođač
Phoenix ContactNumber Of Contacts
2
Pitch
5.08mm
Number Of Rows
1
Mounting Type
Through Hole
Termination Method
Screw
Type
Non Fused Terminal Block
Current Rating
16A
Boja
Black
Voltage Rating
320 V
Series
MKDSN 2.5/ 2-5.08 HT BK
Length
9.5mm
Material
PA (Insulate)
Depth
15mm
Width
10.16mm
Zemlja podrijetla
France
Detalji o proizvodu
Phoenix Contact COMBICON MKDS 5.08mm High Temperature PCB Terminal Blocks
High temperature PCB terminal blocks are reflow solder tolerable and enable a greater proportion of a PCB to be populated and reflow soldered in one operation. Recommended as being suitable for temperature profiles based on EN 61 760-01. When used in reflow oven it is recommended that these components are heat treated at +125°C for 48 hours prior to use.