Phoenix Contact Grey ST 2.5 Feed Through Terminal Block, Single level, 0.2 → 6mm², 800 V
Tehnička dokumentacija
Tehnički podaci
Proizvođač
Phoenix ContactBoja
Grey
Number of Levels
Single
Series
ST 2.5
American Wire Gauge
28 → 12AWG
Termination Method
Spring Clamp
Cable CSA
0.2 → 6mm²
Voltage Rating
800 V
Current Rating
24A
Minimum Operating Temperature
-50°C
Maximum Operating Temperature
+110°C
Model Number
ST 2,5
Zemlja podrijetla
Germany
Detalji o proizvodu
ST 4-FSI/C DIN Rail Terminal Blocks - Phoenix Contact
The ST 4-FSI/C range from Phoenix Contact are DIN rail, spring-cage terminal blocks that feature a C type fuse. This range of DIN rail, fused terminal blocks form a tight connection to your wire thanks to the spring-cage technology, it also means an effortless install! Simply push-in your wire. Not to mention, the fuse in this terminal block is a flat fuse and helps add another level of protection. DIN rails NS 35/7.5 and NS 35/15 are supported for the ST 4-FSI/C range of terminal blocks and the blocks have a nominal current of 30 A with a nominal voltage of 400 V.
The housing on these fused terminal blocks is made from a durable polyamide material and the contacts are copper with a plating. These devices accept 28-10 AWG and have a cross-section of 0.08 mm² - 6 mm².
Informacije o stanju skladišta trenutno nisu dostupne.
Provjerite ponovno kasnije.
€ 1,48
komadno (u pakiranju od 5) (bez PDV-a)
€ 1,85
komadno (u pakiranju od 5) (s PDV-om)
5
€ 1,48
komadno (u pakiranju od 5) (bez PDV-a)
€ 1,85
komadno (u pakiranju od 5) (s PDV-om)
5
Tehnička dokumentacija
Tehnički podaci
Proizvođač
Phoenix ContactBoja
Grey
Number of Levels
Single
Series
ST 2.5
American Wire Gauge
28 → 12AWG
Termination Method
Spring Clamp
Cable CSA
0.2 → 6mm²
Voltage Rating
800 V
Current Rating
24A
Minimum Operating Temperature
-50°C
Maximum Operating Temperature
+110°C
Model Number
ST 2,5
Zemlja podrijetla
Germany
Detalji o proizvodu
ST 4-FSI/C DIN Rail Terminal Blocks - Phoenix Contact
The ST 4-FSI/C range from Phoenix Contact are DIN rail, spring-cage terminal blocks that feature a C type fuse. This range of DIN rail, fused terminal blocks form a tight connection to your wire thanks to the spring-cage technology, it also means an effortless install! Simply push-in your wire. Not to mention, the fuse in this terminal block is a flat fuse and helps add another level of protection. DIN rails NS 35/7.5 and NS 35/15 are supported for the ST 4-FSI/C range of terminal blocks and the blocks have a nominal current of 30 A with a nominal voltage of 400 V.
The housing on these fused terminal blocks is made from a durable polyamide material and the contacts are copper with a plating. These devices accept 28-10 AWG and have a cross-section of 0.08 mm² - 6 mm².