Tehnička dokumentacija
Tehnički podaci
Proizvođač
Phoenix ContactBoja
Grey
Number of Levels
2
Series
ST 10
American Wire Gauge
24 → 6AWG
Termination Method
Spring Clamp
Cable CSA
1.5 → 16mm²
Voltage Rating
550 V
Current Rating
51A
Minimum Operating Temperature
-60°C
Maximum Operating Temperature
'+110°C
Hazardous Area Certification
ATEX, IECEx
Standards Met
CCC, EAC
Model Number
ST 10
Zemlja podrijetla
Poland
Detalji o proizvodu
ST 4-FSI/C DIN Rail Terminal Blocks - Phoenix Contact
The ST 4-FSI/C range from Phoenix Contact are DIN rail, spring-cage terminal blocks that feature a C type fuse. This range of DIN rail, fused terminal blocks form a tight connection to your wire thanks to the spring-cage technology, it also means an effortless install! Simply push-in your wire. Not to mention, the fuse in this terminal block is a flat fuse and helps add another level of protection. DIN rails NS 35/7.5 and NS 35/15 are supported for the ST 4-FSI/C range of terminal blocks and the blocks have a nominal current of 30 A with a nominal voltage of 400 V.
The housing on these fused terminal blocks is made from a durable polyamide material and the contacts are copper with a plating. These devices accept 28-10 AWG and have a cross-section of 0.08 mm² - 6 mm².
Informacije o stanju skladišta trenutno nisu dostupne.
Provjerite ponovno kasnije.
€ 3,65
komadno (bez PDV-a)
€ 4,56
komadno (s PDV-om)
1
€ 3,65
komadno (bez PDV-a)
€ 4,56
komadno (s PDV-om)
1
Kupujte na veliko
količina | jedinična cijena |
---|---|
1 - 9 | € 3,65 |
10+ | € 3,60 |
Tehnička dokumentacija
Tehnički podaci
Proizvođač
Phoenix ContactBoja
Grey
Number of Levels
2
Series
ST 10
American Wire Gauge
24 → 6AWG
Termination Method
Spring Clamp
Cable CSA
1.5 → 16mm²
Voltage Rating
550 V
Current Rating
51A
Minimum Operating Temperature
-60°C
Maximum Operating Temperature
'+110°C
Hazardous Area Certification
ATEX, IECEx
Standards Met
CCC, EAC
Model Number
ST 10
Zemlja podrijetla
Poland
Detalji o proizvodu
ST 4-FSI/C DIN Rail Terminal Blocks - Phoenix Contact
The ST 4-FSI/C range from Phoenix Contact are DIN rail, spring-cage terminal blocks that feature a C type fuse. This range of DIN rail, fused terminal blocks form a tight connection to your wire thanks to the spring-cage technology, it also means an effortless install! Simply push-in your wire. Not to mention, the fuse in this terminal block is a flat fuse and helps add another level of protection. DIN rails NS 35/7.5 and NS 35/15 are supported for the ST 4-FSI/C range of terminal blocks and the blocks have a nominal current of 30 A with a nominal voltage of 400 V.
The housing on these fused terminal blocks is made from a durable polyamide material and the contacts are copper with a plating. These devices accept 28-10 AWG and have a cross-section of 0.08 mm² - 6 mm².