Phoenix Contact3209659 PT 2.5-TWIN/1P-PE Series DIN Rail Terminal Block, 0.14 → 4mm², Single-Level, Plug In
Tehnička dokumentacija
Tehnički podaci
Proizvođač
Phoenix ContactBoja
Green/Yellow
Number of Levels
Single
Series
PT 2.5-TWIN/1P-PE
American Wire Gauge
26 → 12AWG
Termination Method
Plug In
Cable CSA
0.14 → 4mm²
Model Number
PT 2,5-TWIN/1P-PE
Zemlja podrijetla
Germany
Detalji o proizvodu
Pluggable Feed-Through Terminal Blocks with Push-In Connection
Pluggable modular terminal blocks with PT Push-In technology for the modular set-up of control cabinets and systems. The COMBI plug connectors with PIT Push-In connection can be used for signal as well as power wiring. Respective ground terminal blocks are available in the same shape as the basic terminal blocks.
Push-In Connection Terminal Blocks
The PT series is characterised by easy, direct conductor connection, and it consistently uses the advantages of the CLIPLINE complete system. The up to 50% lower insertion forces of the PT push-in connection method also allows easy and direct plugging of solid and stranded conductors with ferrules of 0.34mm2 and up.
Informacije o stanju skladišta trenutno nisu dostupne.
Provjerite ponovno kasnije.
€ 56,30
€ 5,63 komadno (u pakiranju od 10) (bez PDV-a)
€ 70,38
€ 7,038 komadno (u pakiranju od 10) (s PDV-om)
10
€ 56,30
€ 5,63 komadno (u pakiranju od 10) (bez PDV-a)
€ 70,38
€ 7,038 komadno (u pakiranju od 10) (s PDV-om)
10
Tehnička dokumentacija
Tehnički podaci
Proizvođač
Phoenix ContactBoja
Green/Yellow
Number of Levels
Single
Series
PT 2.5-TWIN/1P-PE
American Wire Gauge
26 → 12AWG
Termination Method
Plug In
Cable CSA
0.14 → 4mm²
Model Number
PT 2,5-TWIN/1P-PE
Zemlja podrijetla
Germany
Detalji o proizvodu
Pluggable Feed-Through Terminal Blocks with Push-In Connection
Pluggable modular terminal blocks with PT Push-In technology for the modular set-up of control cabinets and systems. The COMBI plug connectors with PIT Push-In connection can be used for signal as well as power wiring. Respective ground terminal blocks are available in the same shape as the basic terminal blocks.
Push-In Connection Terminal Blocks
The PT series is characterised by easy, direct conductor connection, and it consistently uses the advantages of the CLIPLINE complete system. The up to 50% lower insertion forces of the PT push-in connection method also allows easy and direct plugging of solid and stranded conductors with ferrules of 0.34mm2 and up.