Tehnička dokumentacija
Tehnički podaci
Proizvođač
Phoenix ContactBoja
Grey
Number of Levels
Single
American Wire Gauge
26 → 12AWG
Series
PT 2.5-QUATTRO-DIO/L-R
Termination Method
Push In
Cable CSA
0.14 → 4mm²
Current Rating
500mA
Voltage Rating
800 V
Pitch
5.2mm
Minimum Operating Temperature
-60°C
Maximum Operating Temperature
+105°C
Standards Met
CSA, cULus, EAC, REACH
Model Number
PT 2,5-QUATTRO-DIO/L-R
Zemlja podrijetla
Poland
Detalji o proizvodu
Diode and Lamp Terminal Blocks
Using the diode terminal blocks of the PT push-in connection terminal blocks makes it possible to solve a variety of switching tasks. The diode is integrated either from left to right or vice versa in the terminal housings. Three and four-conductor terminal blocks are also available for multi-conductor connections.
Push-In Connection Terminal Blocks
The PT series is characterised by easy, direct conductor connection, and it consistently uses the advantages of the CLIPLINE complete system. The up to 50% lower insertion forces of the PT push-in connection method also allows easy and direct plugging of solid and stranded conductors with ferrules of 0.34mm2 and up.
Informacije o stanju skladišta trenutno nisu dostupne.
Provjerite ponovno kasnije.
€ 6,33
komadno (u pakiranju od 5) (bez PDV-a)
€ 7,912
komadno (u pakiranju od 5) (s PDV-om)
5
€ 6,33
komadno (u pakiranju od 5) (bez PDV-a)
€ 7,912
komadno (u pakiranju od 5) (s PDV-om)
5
Kupujte na veliko
količina | jedinična cijena | Po pakiranje |
---|---|---|
5 - 25 | € 6,33 | € 31,65 |
30 - 55 | € 6,10 | € 30,50 |
60+ | € 6,09 | € 30,45 |
Tehnička dokumentacija
Tehnički podaci
Proizvođač
Phoenix ContactBoja
Grey
Number of Levels
Single
American Wire Gauge
26 → 12AWG
Series
PT 2.5-QUATTRO-DIO/L-R
Termination Method
Push In
Cable CSA
0.14 → 4mm²
Current Rating
500mA
Voltage Rating
800 V
Pitch
5.2mm
Minimum Operating Temperature
-60°C
Maximum Operating Temperature
+105°C
Standards Met
CSA, cULus, EAC, REACH
Model Number
PT 2,5-QUATTRO-DIO/L-R
Zemlja podrijetla
Poland
Detalji o proizvodu
Diode and Lamp Terminal Blocks
Using the diode terminal blocks of the PT push-in connection terminal blocks makes it possible to solve a variety of switching tasks. The diode is integrated either from left to right or vice versa in the terminal housings. Three and four-conductor terminal blocks are also available for multi-conductor connections.
Push-In Connection Terminal Blocks
The PT series is characterised by easy, direct conductor connection, and it consistently uses the advantages of the CLIPLINE complete system. The up to 50% lower insertion forces of the PT push-in connection method also allows easy and direct plugging of solid and stranded conductors with ferrules of 0.34mm2 and up.